Rolex5512 Posted December 9, 2015 Report Posted December 9, 2015 Hello, Ive tried all combinations of searches but can't come up with a DIY link on how to make the end links holes bigger so they accept gen Rolex spring bars. I tried to use some from my gen Tudor 7928 which presumably has gen spec end links but they are too fat. So for now I have to use the ones that came with the raffles jubilee. Could someone explain or point me into the right direction? CheersDmitry heres a pic of the watch for fun
Bart Cordell Posted December 9, 2015 Report Posted December 9, 2015 You can cut the tubes inside the endlinks. Then open them a little enough to accept gen springbars.
jmb Posted December 10, 2015 Report Posted December 10, 2015 Order some that fit from WSO990 on fleabay...
Rolex5512 Posted December 12, 2015 Author Report Posted December 12, 2015 Order some that fit from WSO990 on fleabay...I ordered some from helenarou but they are the same as the gen. Need to figure out which ones aren't fat.
dbane883 Posted December 12, 2015 Report Posted December 12, 2015 I have a couple 1.7mm x 20 mm bars.
jmb Posted December 13, 2015 Report Posted December 13, 2015 I ordered some from helenarou but they are the same as the gen. Need to figure out which ones aren't fat.I was referring to end-links. You need end-links that have larger tubes for the fat bars...
Rolex5512 Posted December 14, 2015 Author Report Posted December 14, 2015 I was referring to end-links. You need end-links that have larger tubes for the fat bars...well that makes sense
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now