Plexi for new Cartel 5512/13

[Bart Cordell]

Hi !

I broke my Cartel 5512 plexi few weeks ago. I was not disappointed because I intended to replace it by a better one.

I ordered a Sternkreuz XS 303 472 and a Clark 25-19. They fit the case well but not the retaining ring.

The retaining ring internal measurement is 30.05 mm. 

What can I do ? Sand plexi side a little ? File the ring ? Order another ref ?

Thanks.

Edited January 27, 2016 by Bart Cordell

[Dlf]

Find a crystal you really like and buy a few, then I'd sand the inner retaining ring down if you don't have the tools (it's easier) allow 0.40/0.50 to squeeze on some might say more or less that's just what I'm accustomed to doing, if you do have a lathe use that.

[Bart Cordell]

Find a crystal you really like and buy a few, then I'd sand the inner retaining ring down if you don't have the tools (it's easier) allow 0.40/0.50 to squeeze on some might say more or less that's just what I'm accustomed to doing, if you do have a lathe use that.

Thank you for the tip.

But as I read many cartel 5512/3 threads with Clark t19 mod, I don't understand why it can't fit on mine. Many members replace cartel plexi with Clark, sternkreuz, or Ofrei t19 without any work on case or ring.

[StormTooper4]

I got a clarke on mine.  You have to get the retaining ring at a perfect angle and push really firmly. Where is yours not working ?

[Bart Cordell]

I can't even with the right angle.

With the plexi on case it's impossible.

I've achieved to put retaining ring on plexi not on case. It's very hard and the bezel won't turn.

[Bart Cordell]

Finally sanded the retaining ring for about 0,40mm.@Dlf Thanks!

[Dlf]

did it work out ?!

[Bart Cordell]

@dlf

Yes ! The ring is sanded enough to fit Clark 25-19.

Thanks.