Devedander Posted January 3, 2007 Report Share Posted January 3, 2007 So my Ingeniur had very sharp edges on the caseback, namely the indentations where the removal tool goes (these were VERY sharp edges) and the engraved writing has a definite sharp feel to it when you run your fingers over it. On the back of my wrist for a few hours this starts to get a sort of annoying "itch" (like a tag on a shirt that rubs on the back of your neck) so I took some time to file down the notches for the caseback tool (still going to have to do that more) but the writing needs work too... but I can't think of a good way to go about it... It's brushed so I can't just polish it or sand it and it's too definied to use a file or sandpaper on it... Any suggestions on how to soften the enges on this engraving in this situation? Thanks for any advice! Quote Link to comment Share on other sites More sharing options...
pizzanooo Posted January 3, 2007 Report Share Posted January 3, 2007 Somewhere in the past I had read the hard eraser you find on the end of a pen, worked well. Tried it on a Vacheron caseback I had and worked very nice. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.