bertieng Posted January 10, 2007 Report Share Posted January 10, 2007 Is there such a screwdriver commercially available to release the "H" shape screws on the Big Bang? Quote Link to comment Share on other sites More sharing options...
Chronus Posted January 10, 2007 Report Share Posted January 10, 2007 I don't have one and cannot confirm, but my guess is that they would be glued on/in. Quote Link to comment Share on other sites More sharing options...
Finepics Posted January 10, 2007 Report Share Posted January 10, 2007 They are not glued in at all - they are real screws. It's not difficult to modify a screwdriver with a dremel. Quote Link to comment Share on other sites More sharing options...
bertieng Posted January 11, 2007 Author Report Share Posted January 11, 2007 They are not glued in at all - they are real screws. It's not difficult to modify a screwdriver with a dremel. Hi Mark, What is the size of the screwdriver you used for the modification that will fit the hub of "H" screws? Quote Link to comment Share on other sites More sharing options...
Finepics Posted January 13, 2007 Report Share Posted January 13, 2007 I just used one that was the full width of the head - no specific size - then cut a slot in it with a thin cutting disc on my dental micro motor (a more advance dremel type machine). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.