Rob1 Posted January 24, 2007 Report Share Posted January 24, 2007 I'm the happy owner of a new Navitimer Serie Speciale and was wondering how to resize the ss bracelet. The screw seems tiny, and when it is removed the link is still held together with what looks like some kind of pin. Should this pin be pushed out to free the link? I've tried to find a little photo tutorial for this, but the Search function didn't come up with anything. Any help would be much appreciated. Regards Rob Quote Link to comment Share on other sites More sharing options...
Rolexman Posted January 24, 2007 Report Share Posted January 24, 2007 Self explanatory: Quote Link to comment Share on other sites More sharing options...
PAMman Posted January 24, 2007 Report Share Posted January 24, 2007 Just remove the small screws and pull the sections off the threaded tubes which are fixed to the other side. However be careful when reassembling as only the outside of the outer links are polished so don't build them internally in the bracelet. Otherwise you will have to pull it all apart again and the polished surfaces will be scratched. Take this opportunity to rebuild the bracelet so that the screws are all on the same side just like the gen. Quote Link to comment Share on other sites More sharing options...
Rob1 Posted January 24, 2007 Author Report Share Posted January 24, 2007 Thanks, it makes sense now. Remove two screws to release the double pinned link. Blimey, it's a fiddly job putting it back together! Quote Link to comment Share on other sites More sharing options...
UB7 Posted October 5, 2007 Report Share Posted October 5, 2007 Jeez it took me 45 minutes to remove 2 links lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.