How Do You Resize The Bss Bracelet?

[Nebakanezzar]

Hey all,

so hoe do you resize the BSS bracelet? I got the pin unscrewd, but it seems to be just a cap...how do you get the pin out?

thanx

[colinmgzt]

Hi N

the bracelet is in three sections, on the opposite side from the `cap` you have removed

you have to pull the other cap through the centre link

you end up with the cap that the screws go through

and a cap that has two longer pins on it that go through the centre link

hope this explains it

[Mickey Padge]

Just use a small screw driver to take out the screws and the parts of the bracelet you don't need. Just don't put the middle links back in the wrong spot on the sides because the middle links do not have the countersunk hole for the screws.

It is quite easy when you think about it

[Nebakanezzar]

yeah, so I am still not getting it...

I need to add a link, I see there are two screw caps per link, do both need to come off inordeer to open the bracelet? or just one?

how do you get the cap on the opposite side out?

[Mickey Padge]

Both screws need to be removed and you will end up with 3 parts. The part with the tubes, middle section and end part. When you see that they have to go on in order all will become clear I am sure.

[colinmgzt]

Both screws need to come out to remove the link, which should slide through

easily, when you are putting it back together make sure links are

angled in same orientation or they wont fit

[Nebakanezzar]

ok, got it...thanx!

Very kewl design...

[Mickey Padge]

Don't forget you can make small adjustments by moving the bracelets position on the clasp, all you need is a tiny pin

Glad you figured it out

[Rikske]

Look here : a picture says more than a thousand words (Chinese proverbe)