Nebakanezzar Posted February 21, 2007 Report Share Posted February 21, 2007 Hey all, so hoe do you resize the BSS bracelet? I got the pin unscrewd, but it seems to be just a cap...how do you get the pin out? thanx Link to comment Share on other sites More sharing options...
colinmgzt Posted February 21, 2007 Report Share Posted February 21, 2007 Hi N the bracelet is in three sections, on the opposite side from the `cap` you have removed you have to pull the other cap through the centre link you end up with the cap that the screws go through and a cap that has two longer pins on it that go through the centre link hope this explains it Link to comment Share on other sites More sharing options...
Mickey Padge Posted February 21, 2007 Report Share Posted February 21, 2007 Just use a small screw driver to take out the screws and the parts of the bracelet you don't need. Just don't put the middle links back in the wrong spot on the sides because the middle links do not have the countersunk hole for the screws. It is quite easy when you think about it Link to comment Share on other sites More sharing options...
Nebakanezzar Posted February 21, 2007 Author Report Share Posted February 21, 2007 yeah, so I am still not getting it... I need to add a link, I see there are two screw caps per link, do both need to come off inordeer to open the bracelet? or just one? how do you get the cap on the opposite side out? Link to comment Share on other sites More sharing options...
Mickey Padge Posted February 21, 2007 Report Share Posted February 21, 2007 Both screws need to be removed and you will end up with 3 parts. The part with the tubes, middle section and end part. When you see that they have to go on in order all will become clear I am sure. Link to comment Share on other sites More sharing options...
colinmgzt Posted February 21, 2007 Report Share Posted February 21, 2007 Both screws need to come out to remove the link, which should slide through easily, when you are putting it back together make sure links are angled in same orientation or they wont fit Link to comment Share on other sites More sharing options...
Nebakanezzar Posted February 21, 2007 Author Report Share Posted February 21, 2007 ok, got it...thanx! Very kewl design... Link to comment Share on other sites More sharing options...
Mickey Padge Posted February 21, 2007 Report Share Posted February 21, 2007 Don't forget you can make small adjustments by moving the bracelets position on the clasp, all you need is a tiny pin Glad you figured it out Link to comment Share on other sites More sharing options...
Rikske Posted February 21, 2007 Report Share Posted February 21, 2007 Look here : a picture says more than a thousand words (Chinese proverbe) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now