Yannou Posted March 8, 2007 Report Share Posted March 8, 2007 Hi all, I've just received this morning my Breitling Navitimer. I've just one question : the chrono doesn't work but the 9.00 subdial secs hand is running...I don't know if I missed something ? If anybody could help me... Link to comment Share on other sites More sharing options...
andreww Posted March 8, 2007 Report Share Posted March 8, 2007 Sounds right so far. Wind the watch about 25 times. Then shake lightly for a minute. Press the top button. That will start the chrono. Press the top button again, and that will stop it. Let the chrono run to within 10 seconds of 12, then stop (top button). Press the bottom button to reset. Link to comment Share on other sites More sharing options...
andreww Posted March 8, 2007 Report Share Posted March 8, 2007 You should try not to reset the chrono when the second hand is more than 10 seconds from 12. There is enough force that the second hand will spin too far and no longer reset properly. Link to comment Share on other sites More sharing options...
Yannou Posted March 8, 2007 Author Report Share Posted March 8, 2007 You should try not to reset the chrono when the second hand is more than 10 seconds from 12. There is enough force that the second hand will spin too far and no longer reset properly. Great help Yes it' ok now but don't reset properly...I have made a jhckdjchxdnsbcnd ... Link to comment Share on other sites More sharing options...
andreww Posted March 8, 2007 Report Share Posted March 8, 2007 What do you mean "it doesn't reset properly"? Link to comment Share on other sites More sharing options...
Yannou Posted March 8, 2007 Author Report Share Posted March 8, 2007 What do you mean "it doesn't reset properly"? the longer hand is reset at +1 secs (at 12)...I don't understand if I explain well... Link to comment Share on other sites More sharing options...
andreww Posted March 8, 2007 Report Share Posted March 8, 2007 Try running it to 25 seconds. Stop using top button. reset using bottom button. Do this a few times and see if you can spin it back. Link to comment Share on other sites More sharing options...
Yannou Posted March 8, 2007 Author Report Share Posted March 8, 2007 Try running it to 25 seconds. Stop using top button. reset using bottom button. Do this a few times and see if you can spin it back. I can't stop running with the bottom button..I have to first use the top button to stop it...I don't understand..sorry I'm a big newbie... Link to comment Share on other sites More sharing options...
andreww Posted March 8, 2007 Report Share Posted March 8, 2007 YES, always stop with the TOP button. Then RESET with the Bottom one. Link to comment Share on other sites More sharing options...
Yannou Posted March 8, 2007 Author Report Share Posted March 8, 2007 YES, always stop with the TOP button. Then RESET with the Bottom one. ok i'll try this of few times...i appreciate your help thks a lot Link to comment Share on other sites More sharing options...
Yannou Posted March 8, 2007 Author Report Share Posted March 8, 2007 ok i'll try this of few times...i appreciate your help thks a lot resolved thks :thumbsupsmileyanim: Link to comment Share on other sites More sharing options...
Steve G Posted March 8, 2007 Report Share Posted March 8, 2007 WOW I was getting scared there for a moment almost the same feeling everytime I go to reset one of my own, always waiting for it to break Link to comment Share on other sites More sharing options...
andreww Posted March 8, 2007 Report Share Posted March 8, 2007 Glad I could help. You would think the dealers would send instructions out with these watches? Link to comment Share on other sites More sharing options...
andreww Posted March 8, 2007 Report Share Posted March 8, 2007 WOW I was getting scared there for a moment almost the same feeling everytime I go to reset one of my own, always waiting for it to break It doesn't break. What happens is that the collar spins on the shaft because of the high torque. This can happen on gens too. Just don't reset when the hand is more than 10 seconds from 12 and you won't have a problem. Link to comment Share on other sites More sharing options...
Steve G Posted March 8, 2007 Report Share Posted March 8, 2007 I know..but after hearing nothing but horror stories with 7750's and chronographs not resetting or hands slipping, I still whince everytime I use mine and reset them. Link to comment Share on other sites More sharing options...
Yannou Posted March 8, 2007 Author Report Share Posted March 8, 2007 I know..but after hearing nothing but horror stories with 7750's and chronographs not resetting or hands slipping, I still whince everytime I use mine and reset them. I was afraid too for the same reasons.... Link to comment Share on other sites More sharing options...
DWSmoot Posted March 9, 2007 Report Share Posted March 9, 2007 Great question, post, and info from Andreww. I received mine from Joshua this week and was also having this problem. Problem solved now! Thanks Andreww! Link to comment Share on other sites More sharing options...
hiker01 Posted March 10, 2007 Report Share Posted March 10, 2007 It doesn't break. What happens is that the collar spins on the shaft because of the high torque. This can happen on gens too. Just don't reset when the hand is more than 10 seconds from 12 and you won't have a problem. Andreww, would this work on all 7750s? I have an AP RO with the same problem! Link to comment Share on other sites More sharing options...
andreww Posted March 11, 2007 Report Share Posted March 11, 2007 It might. All you are trying to do is spin it the opposite direction that it already slipped. Give it a try! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now