pitimany Posted April 9, 2007 Report Share Posted April 9, 2007 Almost complete, Need some help, where can i get a hand for a gen Tudor Chrono ? It is bigger than .26 but I don't know the Size? (This info also will be appreciated) Quote Link to comment Share on other sites More sharing options...
RWG Technical Posted April 9, 2007 Report Share Posted April 9, 2007 It's 0.25mm hand size, the problem is the hand tube is still stuck on the post in the center seconds. You can see the tube if you look at it closely, you need to remove the broken tube from the post, and then you can install the hand no problem. RG Quote Link to comment Share on other sites More sharing options...
pitimany Posted April 9, 2007 Author Report Share Posted April 9, 2007 It's 0.25mm hand size, the problem is the hand tube is still stuck on the post in the center seconds. You can see the tube if you look at it closely, you need to remove the broken tube from the post, and then you can install the hand no problem. RG Thank you. I did not see the hand tube before, but you are right the tube is there. With best regards, Quote Link to comment Share on other sites More sharing options...
eunomians Posted April 23, 2007 Report Share Posted April 23, 2007 Hey, how did this project turn out? Don't be shy if u took pics of the finished product - let us see 'em Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.