vlydog Posted June 12, 2007 Report Share Posted June 12, 2007 Ok all, how much trouble am I in? I thought I was prepared. I had the proper screwdriver and a new set of tubes and screws. This was the first time I have attempted to change a strap. The watch, a never worn FER008 - the strap, a new HKTan gator - I even used a new screw and tube set. The short end of the strap mounted fine. The longer end was tough. After inserting the screw through the tube, I had trouble finding the hole that accepts the threads. When I finally felt all was good I started tightening. Well I guess I cross-threaded the screw. At first I could not back the screw out and now it just spins in both directions. To top that, I have scratched the lug unmercifully. Is this a problem that can be fixed? Is there a way to bring the SS surface back without scratches? I will not be able to do any repairs myself I just want to know if this is fixable so I can send it out. I feel sick. With respect, Vlydog Link to comment Share on other sites More sharing options...
Wiss Posted June 12, 2007 Report Share Posted June 12, 2007 Can you attach some pictures? It might help us visualize the issue... I have seen some threads about polishing SS so I think you will okay there, but a couple of pics would help... Link to comment Share on other sites More sharing options...
vlydog Posted June 12, 2007 Author Report Share Posted June 12, 2007 Can you attach some pictures? It might help us visualize the issue... I have seen some threads about polishing SS so I think you will okay there, but a couple of pics would help... Thank you for your response but I am not equipped for pics right now. Link to comment Share on other sites More sharing options...
jfreeman420 Posted June 12, 2007 Report Share Posted June 12, 2007 By the title I thought the thread would be a lot more exciting. Even more so when you said "Ok all, how much trouble am I in?" Oh well. Good luck though. Link to comment Share on other sites More sharing options...
kingkitesurf Posted June 12, 2007 Report Share Posted June 12, 2007 If the screw screws both ways you are screwed. Hope the right strap is in lace so you can enjoy the pretty watch. The scratches can be buffed out (when they are not too deep) with buffing polish and dremel. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now