Question about Asian 7750 reseting to 0

[V]

A couple of weeks ago my 212 with Asian 7750 stopped reseting to 0 and it constantly resets to 2.

Probably a gear has moved or something? How easy is tho fix this?

I have heard of Asian 7750 reseting everytime to different number but mine always was reseting to 0 and now to 2...

Any help on this?

[Finepics]

A couple of weeks ago my 212 with Asian 7750 stopped reseting to 0 and it constantly resets to 2.

Probably a gear has moved or something? How easy is tho fix this?

I have heard of Asian 7750 reseting everytime to different number but mine always was reseting to 0 and now to 2...

Any help on this?

If the chrono functions normally otherwise then most likely the hand is slipping on the hand tube. The Zigmeister has a post somewhere about how to fix it on the 196/188 models where this was a known problem. I use an Araldite epoxy resin (metal bond) product to fix them.

[V]

If the chrono functions normally otherwise then most likely the hand is slipping on the hand tube. The Zigmeister has a post somewhere about how to fix it on the 196/188 models where this was a known problem. I use an Araldite epoxy resin (metal bond) product to fix them.

Yeah.. blah blah blah... since you know how to fix it I don't care.. I will send it to you to take care of it

[Rolexman]

It's really easy. Just uncase the movement (explained in one of The Zigmeister's tutorials) and gently push the hand back in the 12 o clock position (after the watch has been reseted). After this use a small needle point of epoxy to secure it.

[Finepics]

Yeah.. blah blah blah... since you know how to fix it I don't care.. I will send it to you to take care of it