alant Posted June 27, 2007 Report Share Posted June 27, 2007 Hi dear all, I'm keen in getting a Breitling Navitimer. Most probably it will be in stainless steel bracelet or those two tone ones. Any recommendations on which is a better replica and who to get it from? And for those who have the Navitimer, I would appreciate if you all could share your experiences too. Thanks. Link to comment Share on other sites More sharing options...
b16a2 Posted June 27, 2007 Report Share Posted June 27, 2007 At the top of the Breitling section is a community guide to the best Breitling replicas. Have a read through there, and I think it will answer most, if not all the questions you may have. Link to comment Share on other sites More sharing options...
alant Posted June 27, 2007 Author Report Share Posted June 27, 2007 Hi thanks for the reply. I have taken a look but didn't mention much about who to get it from. Link to comment Share on other sites More sharing options...
b16a2 Posted June 27, 2007 Report Share Posted June 27, 2007 All new Naivitimers sold come from the same factory, so they're all the same, next piece of advice is to upgrade your membership, then you'll get access to a few new areas that will help you even further in your next question Link to comment Share on other sites More sharing options...
alant Posted June 27, 2007 Author Report Share Posted June 27, 2007 Thanks pal! That's a useful piece of info. I didn't know all the Navitimers come from the same factory. Ok will also look into upgrading of the membership. In the meantime, any idea do these replicas come in asia movement or any swiss movement ones? Thanks. Link to comment Share on other sites More sharing options...
b16a2 Posted June 27, 2007 Report Share Posted June 27, 2007 Good man Well, you can buy a very expensive Navitimer with the sub dials at 12 9 6 o'clock positions, but most of them come with an Asian movement, which is a copy of the Swiss 7750. The newer asian movements are very good, I have never had any problems with them, but I would recommend a service at some point, then it should last you like a Swiss one would. Link to comment Share on other sites More sharing options...
alant Posted June 27, 2007 Author Report Share Posted June 27, 2007 Hi when u mentioned about very expensive for those sub dials at 12 9 6 o'clock position, what's the price range like? I saw some with sub dials at 9 6 3 o'clock positions, are they inferior in any ways? So I guess most comes with asia movement... Link to comment Share on other sites More sharing options...
b16a2 Posted June 27, 2007 Report Share Posted June 27, 2007 For the Swiss version it is just shy of $900. The one you mentioned is the asian version, and it is a modified 7750 movement to allow the repositioning of the subdials. This also causes the datewheel to sit a couple of mm below the dial, instead of flush with it. Link to comment Share on other sites More sharing options...
alant Posted June 27, 2007 Author Report Share Posted June 27, 2007 Thanks pal! So does those with sub dials at 12 9 6 o'clock position generally mean they are swiss version and of better quality? Link to comment Share on other sites More sharing options...
b16a2 Posted June 27, 2007 Report Share Posted June 27, 2007 No the majority of them are Asian movements. There is only one dealer that publicly sells the Swiss version of the navitimer. Personally I would buy a $300ish Navitimer with the Asian 7750 movement, have it serviced for 'x' amount, then sit back and observe how much more money you have in your bank account compared to if you had have bought the swiss version. Link to comment Share on other sites More sharing options...
alant Posted June 27, 2007 Author Report Share Posted June 27, 2007 Haha quite true well said! Can like have 2 pieces of asia movement instead of just a swiss piece plus the fact the replica standard is getting better and better. Well, just curious how accurate are the slide rules on these replicas? Anything to watch out for? Thanks. Link to comment Share on other sites More sharing options...
b16a2 Posted June 27, 2007 Report Share Posted June 27, 2007 Unfortunately the slide rule is one of the flaws. It doesn't line up perfectly, but by such a minimal amount, it isn't noticeable. Some people can't live with it, but from a massive breitling fan, I can assure you it isn't that bad at all. Just means if you are a pilot, it won't do your planning and flying much good! Apart from this they are pretty good reps! Link to comment Share on other sites More sharing options...
The Red Baron Posted June 28, 2007 Report Share Posted June 28, 2007 Could I throw a question in as well, having already checking out that great Breitling rep buyers'-guide. I am debating between the ~$300 Asian 7750 and the ~$900 Swiss 7750. I understand the Swiss is just beautiful and runs like a charm, and that the Asian will as well with perhaps one service a year? Can you take one of these watches to a decent watch store in your town to have it serviced? How do you guys service good quality reps? Thanks! No the majority of them are Asian movements. There is only one dealer that publicly sells the Swiss version of the navitimer. Personally I would buy a $300ish Navitimer with the Asian 7750 movement, have it serviced for 'x' amount, then sit back and observe how much more money you have in your bank account compared to if you had have bought the swiss version. Link to comment Share on other sites More sharing options...
b16a2 Posted June 28, 2007 Report Share Posted June 28, 2007 I have a local watchmaker near me who doesn't mind working on reps, and was more than happy to service the movement for me, best bet is to find a local watchsmith (not an Authorised Dealer mind you), and ask them. Link to comment Share on other sites More sharing options...
The Red Baron Posted June 28, 2007 Report Share Posted June 28, 2007 Thanks. And being new to this, what is your approach when asking a non-Authorized Dealer watchsmith type shop about reps? "Hey, do you mind taking a look at and/or servicing a high-quality replica with a good asian 7750 copy movement?" (assuming that is the watch I bring in) I had had a rep way back when, and when the slightest hint that it was a rep came up with some watch guys they wouldn't go near it, although that may have been an extremely cheap rep. Do you guys find that most of those watchsmith guys who have their own little shops/been around for a while, won't mind working on a copied 7750 movement (considering it is basically like the gen)? Any insight for local watchsmith store servicing is appreciated (or if there is a thread started somewhere on this--in particular local watchsmithes, not sending in to forum members) Thanks Again. I have a local watchmaker near me who doesn't mind working on reps, and was more than happy to service the movement for me, best bet is to find a local watchsmith (not an Authorised Dealer mind you), and ask them. Link to comment Share on other sites More sharing options...
alant Posted June 28, 2007 Author Report Share Posted June 28, 2007 Ok back to the Navitimer. I was browsing through and realised there are easily 20 different models or more of the Navitimer to choose from...tough choice man! Any recommendations on who to get from so that I won't end having a lousy piece or worst still paying up and never receive the watch? Thanks. Link to comment Share on other sites More sharing options...
The Red Baron Posted June 28, 2007 Report Share Posted June 28, 2007 Oops sorry I sort of hijacked your thread, yes please back on topic (any responses to my questions can be PM'ed to me) Ok back to the Navitimer. I was browsing through and realised there are easily 20 different models or more of the Navitimer to choose from...tough choice man! Any recommendations on who to get from so that I won't end having a lousy piece or worst still paying up and never receive the watch? Thanks. Link to comment Share on other sites More sharing options...
b16a2 Posted June 28, 2007 Report Share Posted June 28, 2007 Thanks. And being new to this, what is your approach when asking a non-Authorized Dealer watchsmith type shop about reps? "Hey, do you mind taking a look at and/or servicing a high-quality replica with a good asian 7750 copy movement?" (assuming that is the watch I bring in) I had had a rep way back when, and when the slightest hint that it was a rep came up with some watch guys they wouldn't go near it, although that may have been an extremely cheap rep. Do you guys find that most of those watchsmith guys who have their own little shops/been around for a while, won't mind working on a copied 7750 movement (considering it is basically like the gen)? Any insight for local watchsmith store servicing is appreciated (or if there is a thread started somewhere on this--in particular local watchsmithes, not sending in to forum members) Thanks Again.U nfortunately I doin't think there is any standard way to approach them. I would go in and be frank about it really. Like you have stated, I have a replica watch, that has 7750 (asian), would you be prepared to service it. Ok back to the Navitimer. I was browsing through and realised there are easily 20 different models or more of the Navitimer to choose from...tough choice man! Any recommendations on who to get from so that I won't end having a lousy piece or worst still paying up and never receive the watch? Thanks. Again no standard answer to this one. If you go through our trusted dealers, you will receive the watch. As far as which Navi to go for, I can't really help there. I have a two tone Navitimer that has dials at 12,9,6 on a strap and love it. Another member, and also a big Breitling fan has one at 3,6,9 and it looks awesome on the strap too. Link to comment Share on other sites More sharing options...
cc Posted June 28, 2007 Report Share Posted June 28, 2007 I purchased a modded Navitimer a couple of weeks ago and it looks identical to the genuine. On the 12-9-6, there are 2 versions. The older has the silver subdial with a correct slide rule and a newer version has a whiter subdial with the incorrect slide rule. They both have the same asian 7750 movement so whichever one meets your eye as far as accuracy. i bought one from member on another board. It was the older Navitimer modded with a Gen dial, swiss ETA 7750, modded bezel, and a gen crown. Should be cheaper than $900 if you have it modded yourself. stan Link to comment Share on other sites More sharing options...
alant Posted June 29, 2007 Author Report Share Posted June 29, 2007 Thanks for sharing stan! And b16a2, any chance for you to pm me who you got your two tone navitimer from and the price? Haha the two tone model is also one of my favorite and I'm aiming at it! By the way does the gold plating fade off after some time? And Red Baron don't worry about hijacking of thread, I'm also learning from all of you. Lastly, any Breitling fans from Singapore? Link to comment Share on other sites More sharing options...
isaacly Posted July 20, 2007 Report Share Posted July 20, 2007 what's the slide rule you guys are talking about? Link to comment Share on other sites More sharing options...
b16a2 Posted July 20, 2007 Report Share Posted July 20, 2007 If you see a picture of a black dialed navitimer, the slide rule is the white part on the outside. This moves around so caluclations can be made using the numbers on the dial and the slide rule. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now