Source for 557B endlinks

[stilty]

I'm trying to find a set of gen. 557B endlinks. Anyone have a source?

Or could I, or has anyone ever, modified a set of 557 endlinks to have the recessed notch for springbars? I have a no holes case so need the 557B endlinks.

Thanks!

[rosnik]

Is 557B the 19mm endlink?

[stilty]

Is 557B the 19mm endlink?

yes, 19mm.

[rosnik]

yes, 19mm.

Hi Stilty,

On my 1500 Franken 'date' I bought one complete 19mm band, and fortunatly I solved that problem.

Pay attention that you can not add 19mm end link to 20mm band too,

they are unfortunately different.

So I think you have jet one 19mm band to you.

Wile you can test this cheaper aftermarket too.

http://cgi.ebay.it/OYSTER-WATCH-BAND-ENDPI...3QQcmdZViewItem

[rosnik]

http://cgi.ebay.it/OYSTER-STRAP-BRACELET-1...1QQcmdZViewItem

It is NOT GEN !

Nico

[stilty]

THanks Nico,

I have a gen band, but need gen 557B endlinks as the case has no lug holes. The regular 557 will only work on older style cases.

I don't know if any members have some 557B endlinks that they swapped for regular 557 to use in PM Daytonas.

thanks.

[stilty]

This is the style of endlink I need. Notice the notches for the springbar tool. The case I have has no lug holes so I need endlinks with notches to remove springbars.

But now I am confused as I see another 557 B that does not have the notches for springbar tool???

Anyway, anyone out there have a spare set of notched gen endlinks for 19mm oyster bracelet?