drop Posted October 6, 2007 Report Share Posted October 6, 2007 I have a stubborn crystal retaining ring on my 1665... tried to tap in a razor blade with a mallet but no luck getting any sort of gap going. Any advice? Link to comment Share on other sites More sharing options...
rag9fx Posted October 6, 2007 Report Share Posted October 6, 2007 there really is no need to "tap" it in... just wedge it in a little and pry little by little around the diameter of the retaining ring. hope that helps a bit. What type of blade are you using? I normally use a window or glassier scraping blade on a scraper handle. i find that using a handle gives me a bit more leverage . Link to comment Share on other sites More sharing options...
drop Posted October 6, 2007 Author Report Share Posted October 6, 2007 I read a post in the archive suggesting a little tap if the ring was stubborn. I'm just using a standard razor blade, I'll go shop for a sharper edge... didn't think of that. Thanks for the lead. Link to comment Share on other sites More sharing options...
drop Posted October 9, 2007 Author Report Share Posted October 9, 2007 Just in case some fellow noob runs into the same problem someday, I finally just put the case into a vise and lightly tapped a razor blade with a hammer between the ring and the case. Came off easy... Link to comment Share on other sites More sharing options...
lazarini Posted October 10, 2007 Report Share Posted October 10, 2007 Hmmm ... please be so kind and share with me if ure 1665 is by any chance one of the latest pasos mbws ? cheers laz Link to comment Share on other sites More sharing options...
drop Posted October 11, 2007 Author Report Share Posted October 11, 2007 It's from TTK... and in a million pieces at the moment. Any particular part you'd like to see? Link to comment Share on other sites More sharing options...
lazarini Posted October 11, 2007 Report Share Posted October 11, 2007 No i was just interested as new 1665 retaining rings are hard to pop off ... mine is from paso ... regards laz Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now