barsa4ever Posted November 9, 2007 Report Share Posted November 9, 2007 (edited) I just got this watch from TTK, beautiful as I already mentioned in dealer review, but the rotor makes this annoying noise, Has somebody had this problem? Was it fixed? Please tell what to do Thanks Edited November 9, 2007 by barsa4ever Link to comment Share on other sites More sharing options...
Xyphis Posted November 9, 2007 Report Share Posted November 9, 2007 TTK probably sold you yet another bad watch ( ) They are commonly found that way. I significantly decreased the noise by opening up the caseback and using fine litheum grease on the rotor bearings. It was simple and solved 90% of the sound. I understand that a 100% fix involves a 44mm PAM gasket, but I have not done this. Good Luck! I love mine Link to comment Share on other sites More sharing options...
Guest carlsbadrolex Posted November 9, 2007 Report Share Posted November 9, 2007 Do some searching... It appears they all sound like a plane with one dead engine and the second on the way out. Mine is so loud it simply cant be worn. The simple act of typing makes so much noise that people across the office complain. I have had mine serviced with no improvement. Link to comment Share on other sites More sharing options...
Emmzy Posted November 9, 2007 Report Share Posted November 9, 2007 Either get used to it or don't wear it.....they are all the same. I wear mine regularly and wear a pair of ear muffs. A bit hot for them here in Spain but at least I can concentrate. lol Link to comment Share on other sites More sharing options...
dadog13 Posted November 9, 2007 Report Share Posted November 9, 2007 hey what's that noise!...who is wearing right now the Chopard GTXL...I cannot concentrate on my work because of this noise... just kidding...yesterday I've read a nice review from a member on RG about all versions of this model since it was released...and since I've been keeping an eye on this one I definitely decided to purchase it...I knew that there was present some kind of noise of the rotor...but so loud that makes other people around and the owner nervous...I didn't know that! well, who cares...I will get it...and I will find a solution to this probl... BTW, is this present on both versions...asian 21j and asian7750 ? Link to comment Share on other sites More sharing options...
spooky driver Posted November 9, 2007 Report Share Posted November 9, 2007 the rotor is very loud but i only notice it when i violently shake my arm......so i try avoiding doing that! Link to comment Share on other sites More sharing options...
Emmzy Posted November 9, 2007 Report Share Posted November 9, 2007 hey what's that noise!...who is wearing right now the Chopard GTXL...I cannot concentrate on my work because of this noise... just kidding...yesterday I've read a nice review from a member on RG about all versions of this model since it was released...and since I've been keeping an eye on this one I definitely decided to purchase it...I knew that there was present some kind of noise of the rotor...but so loud that makes other people around and the owner nervous...I didn't know that! well, who cares...I will get it...and I will find a solution to this probl... BTW, is this present on both versions...asian 21j and asian7750 ? Seriously it's a small problem for an inexpensive and good rep. I love mine! Link to comment Share on other sites More sharing options...
Xyphis Posted November 9, 2007 Report Share Posted November 9, 2007 well, who cares...I will get it...and I will find a solution to this probl... Umm, didn't you read the bottom of my post? It works Link to comment Share on other sites More sharing options...
Guest TTK Posted November 9, 2007 Report Share Posted November 9, 2007 I personally have a white and a black dial..and have to say that the rotor noise isn't obtrusive....I've also just checked mine against another 2x I have in stock...same on each watch....mind you the quartz one was very quiet.... Link to comment Share on other sites More sharing options...
Rolexman Posted November 23, 2007 Report Share Posted November 23, 2007 How do I remove the rotor on this baby? Link to comment Share on other sites More sharing options...
Xyphis Posted November 24, 2007 Report Share Posted November 24, 2007 There is a small screww in the center of the rotor that takes it out, BUT.... I didn't do that. When you open the caseback, even peer through it before you do, you will see the little bearings just under the rotor in a small circle. when the caseback is off you can "toothpick" a little lithium grease about the bearings, all the while cleaning the surface/pushing it in. We are talking head of the toothpick amount here, not alot. then put case back on and spin spin spin. Agan a major improvement, but not total. don't notice noise AT ALL when I wear it. Good luck with yours Link to comment Share on other sites More sharing options...
Rolexman Posted November 24, 2007 Report Share Posted November 24, 2007 There is a small screww in the center of the rotor that takes it out, BUT.... I didn't do that. When you open the caseback, even peer through it before you do, you will see the little bearings just under the rotor in a small circle. when the caseback is off you can "toothpick" a little lithium grease about the bearings, all the while cleaning the surface/pushing it in. We are talking head of the toothpick amount here, not alot. then put case back on and spin spin spin. Agan a major improvement, but not total. don't notice noise AT ALL when I wear it. Good luck with yours Thanks for the tip, appreciate it! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now