Panerai 24mm Screws

[leitztozeiss]

I just received a beautiful 111H from Maxmsu (pics later). The strap is held to the case by screw assemblies, each using one long screw that threads into a tiny screw. However, one of my small screws has a slightly large head and does not sit flush in the lug. Anyone know where to purchase replacement screw assemblies? Thanks.

[swdivad]

Most of the strap dealers have them... Try Don, I know that Drew at Europelli has them including tubes.... He may even help you into a nice strap :-)

[ubiquitous]

Errrrr... Typically, the screw pins that secure that strap at the lugs are a single, long pin that threads into the lug/case. But, what you're explaining sounds more like there are two screw heads; one at each side?

[maxmsu]

Hi there, you should check with me first hehe just PMed ya.

[leitztozeiss]

Errrrr... Typically, the screw pins that secure that strap at the lugs are a single, long pin that threads into the lug/case. But, what you're explaining sounds more like there are two screw heads; one at each side?

Yeah, just like my Marina Militare '40' - screws on both sides. The long screw has a threaded hole at the end. The short screw threads into that hole. It makes strap changes kind of tedious, but I like the symmetric look of two screw heads on both sides of the watch.

[watchinger]

Hi leitz,

take a look here

http://www.ofrei.com/page888.html

maybe you have a little luck and find some

cheers

p.s.I use spezial Springbars on my Marina Militare