elwopo Posted November 24, 2007 Report Share Posted November 24, 2007 Hey all. OK...get the "protection" ideas out out of your head......at least in the first way you thought.... Last time (the first time) I tried to mod CGs....I said never again! Let's just say it did not go according to plan. Well.....here I go again I suppose. I've got a pretty nice starting piece and I can't resist the temptation to make it a little better. When you do this....what do you use to keep the shavings out of the stem? I used "blue" tape to protect the case and crystal...and it seemed to work ok (except when the sandpaper went off and tore it up....LOL). With the stem being so small...the tape just did not want to stick at all. I switched to regular masking tape but found that it left a residue. Tried to clean the residue with denatured alcohol....and it ate part of the O ring. So......before I go through this fun again.....I thought I'd ask this time. Quote Link to comment Share on other sites More sharing options...
Jetsons Posted November 24, 2007 Report Share Posted November 24, 2007 elwopo, if you have plastic straws handy, you may have a size that will fit snugly. Cut a piece to the desired length and it should work. You can also wrap tape around it if you want additional protection. A piece of heat shrink would be similar. You can find these at Radio Shack and come in assorted small diameters. Best of luck with the project! Added: I reread your post. Do you mean protecting the case tube? The stem/crown should be safely off the watch. The above will protect the case tube if you decide to work around it. Quote Link to comment Share on other sites More sharing options...
elwopo Posted November 24, 2007 Author Report Share Posted November 24, 2007 Added: I reread your post. Do you mean protecting the case tube? The stem/crown should be safely off the watch. The above will protect the case tube if you decide to work around it. Sorry....you are completely correct. I meant case tube....just posted too quickly. Was thinking the "stem" of the case... Heat shrink tubing....pure genius. Thanks! Quote Link to comment Share on other sites More sharing options...
Pugwash Posted November 24, 2007 Report Share Posted November 24, 2007 You may be better off removing the tube as you need to grind down at its base. I say remove the tube and replace it with gen. That way you get a better tube, better CGs and no risks. Quote Link to comment Share on other sites More sharing options...
freddy333 Posted November 26, 2007 Report Share Posted November 26, 2007 I agree with Pug. Whenever you are doing anything that involves the removal of metal, you should completely disassemble the case. Remove the movement, crystal and crown tube. Otherwise, you risk either damaging one of these other parts or they will throw off your mods because they get in the way of your tools. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.