fotoman Posted April 2, 2008 Report Share Posted April 2, 2008 do you have to "pop" the bezel off gently with a piece of metal and or to take it off do you have to remove the screws from the outside of the bezel -- i.e. are they just decoration on the rep. thanks My watchmaker had a bit of a time getting a steelfish crystal off, i don't want him to screw up this bce Quote Link to comment Share on other sites More sharing options...
Guest porsche356a Posted April 2, 2008 Report Share Posted April 2, 2008 Removing the bezel is not necessary to pop off the xtal. You can simply remove the rider tabs (12/15/30/45) to allow the xtal to be removed. But, if you did want to remove the bezel, the screws are functional, and must be removed to loosen the retainer spring against the bezel assy. Hope this helps. Quote Link to comment Share on other sites More sharing options...
fotoman Posted April 2, 2008 Author Report Share Posted April 2, 2008 Removing the bezel is not necessary to pop off the xtal. You can simply remove the rider tabs (12/15/30/45) to allow the xtal to be removed. But, if you did want to remove the bezel, the screws are functional, and must be removed to loosen the retainer spring against the bezel assy. Hope this helps. very much, thanks Quote Link to comment Share on other sites More sharing options...
DuDro Posted April 2, 2008 Report Share Posted April 2, 2008 Ok...how about on a SOSF? The rider tabs are fixed...Any ideas? Quote Link to comment Share on other sites More sharing options...
Guest porsche356a Posted April 2, 2008 Report Share Posted April 2, 2008 Ok...how about on a SOSF? The rider tabs are fixed...Any ideas? I guess you can simply loosen and remove the bezel. Quote Link to comment Share on other sites More sharing options...
Rolexman Posted April 2, 2008 Report Share Posted April 2, 2008 The bezel on the SOSF is press fitted. The scews are just for looks. Quote Link to comment Share on other sites More sharing options...
Guest carlsbadrolex Posted May 1, 2008 Report Share Posted May 1, 2008 The bezel on the SOSF is press fitted. The scews are just for looks. Are you sure about this??? I have popped off MANY bezels, and I cannot get the bezel on my sfso to come off. I also have attempted to unscrew what should be the retainer screws... no dice there either. Quote Link to comment Share on other sites More sharing options...
jeroen1985 Posted May 1, 2008 Report Share Posted May 1, 2008 I popped two bezels of the SOSF. The first one came pretty quick of with some help of a knife. YES without damage the bezel or case. The second one was very hard to take of. I damage the bezel and case. I noticed that the first SOSF had a bezel that wasn't really tight to the case and had a smaller spring that the second SOSF. My opinion: If the bezel is tight to the SOSF case DON'T take it off. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.