Need advice on davidsen parts

[jitai]

Hi All,

Need some advice here.

1. I am wondering if davidsen's PAM caseback will fit on cartel's PAM watch case?

2. Will the cartel's crown and CG fit on davidsen's watch case?

3. Any own davidsen's single AR crystal. What is hue effect. Is it strong and obvious like double AR on SFSO?

4. Can davidsen's dial fit into cartel's watch case?

Thank you very much for your help.

[peepshow]

Hi All,

Need some advice here.

1. I am wondering if davidsen's PAM caseback will fit on cartel's PAM watch case? -- I believe so, yes.

2. Will the cartel's crown and CG fit on davidsen's watch case? -- I don't think so. At least they aren't interchangeable between my DSN 010D and Angus' "Ultimate" 00B or my 111E from Silix.

3. Any own davidsen's single AR crystal. What is hue effect. Is it strong and obvious like double AR on SFSO? -- Not nearly as strong as the SFSO. It's blue tinted, but much less pronounced than the double AR on the 'Fish.

4. Can davidsen's dial fit into cartel's watch case? -- Not without modifications.

Thank you very much for your help.

[PAMman]

Just to clarify - some of DSN's dials are the correct gen / normal rep size.

[chris5264]

1. I am wondering if davidsen's PAM caseback will fit on cartel's PAM watch case?

2. Will the cartel's crown and CG fit on davidsen's watch case?

3. Any own davidsen's single AR crystal. What is hue effect. Is it strong and obvious like double AR on SFSO?

4. Can davidsen's dial fit into cartel's watch case?

This is from memory,,,but no,,I don't believe you can switch parts,,I know the dial is different and pretty sure the CG is a different size. The AR is pretty good but not like 2x ar,,,as I recall. However,,it's been at least a years since I did these types of mods.

[fishgodeep]

Only thing to add is DVSN sells std rep parts as well - this case set comes with his AR sapphire and new spring loaded 2.0mm crown.

I have found his std rep CG's to be one of the best I have been able to source and closest to Jimmy CG's

PAM 040 , 5218-201 / 202 / 203 and most of the Ti model dials fit std rep cases - I believe the interior milling on Ti cases is the same dims as std rep.

Good luck