Easy way to remove the cheap sound from your rolex rep

[MAHLER]

When you acquired a SS Rolly Rolex Replica the first impression is how low and bad is the finish of steel and how sound cheap the bracelet in the specific one . After some practical with my and other reps, in order to improve & fix the general finish and remove the sound cheap, I've decided to share with you this mods, easy for everyone especially for noobs, but quick-secure and, at the end, with grreeattt results.

Toolz:

1) SS rolly rlx replica ( if possible with swiss body );

2) stainless steel dry-cleaner (in Italy -> "smac brilla acciaio" is perfect!! );

3) abrasive disc paper and sponge;

4) cotton fioc;

4) last but not least the comic strips of Dyland Dog (joke );

Distribute a few drops of stainless steel dry-cleaner on cotton fioc:

now start dirty & clean all satin parts of back:

Repeat until with fingers you're not satisfied of the result and after start working on the front... if are scratches or some imperfections on the surface of bracelet spend the time with a green side of an abrasive sponge:

Use abrasive paper to redefine the metal parts that are sharp to the touch.

and start dirty & clean all satin parts of front:

When you have finished lubricated and wait a half hour before removing the excess oil .

Regards.

Mahler

Edited April 22, 2008 by MAHLER

[Slartibartfast]

I've decided to share with you this mods, easy for everyone especially for noob, but quick-secure and, at the end, with grreeattt results.

Wow! Thanks MAHLER. I'll grab my Dylan Dog mag, and give this a go.

[Corgi]

You can't do this on gold plate. Be advised.