Resizing Aquaracer Bracelet

[goone]

HI,

I am new to the forum been searching and cannot find any info regard how to resize aquaracer bracelet, any info will be greatly appreciated.

Thanks

[docblackrock]

Take one pair of falconer's gloves...

Add welders' goggles....

Stir up with a thermic lance....

Add in a clean pair of Kevlar underwear...

Season with one bottle of single malt Scotch, at least 20 years in age...

Failing that, suggest you go down to your local watch battery and strap monkey, and get it resized there for the sake of 10€.

Will save you all of the above 'experience'

[dkaoboy]

I just received the bargain 16 piece watch tool kit from Amazon last night. Even with the tool kit, it took me 3 hours to resize the bracelet. Basically its those darn tubes in the center that make it so difficult. Another problem is the alignment. Each link has 2 sections to get through, so you have to make sure the resistance of the pin is from just the tube alone, and not because your pusher pin is stuck against one of the link sections.

[fakemaster]

They are a [censored] and a half. But with practice.

[Ray T]

They are a [censored] and a half. But with practice.

with the proper tools, you can resize it pretty quickly, i was able to do mine in about 30 seconds per link or so

[Rolexman]

The Aquaracer is a [censored] to size. I had to make my own tool by sanding down a jewelers screwdriver so thin it fitted the hole in the bracelet (and the tube inside). Then a small hit from a 3kg hammer and voila.. out comes the pin LOL.

Look HERE.