goone Posted August 20, 2008 Report Share Posted August 20, 2008 HI, I am new to the forum been searching and cannot find any info regard how to resize aquaracer bracelet, any info will be greatly appreciated. Thanks Quote Link to comment Share on other sites More sharing options...
docblackrock Posted August 20, 2008 Report Share Posted August 20, 2008 Take one pair of falconer's gloves... Add welders' goggles.... Stir up with a thermic lance.... Add in a clean pair of Kevlar underwear... Season with one bottle of single malt Scotch, at least 20 years in age... Failing that, suggest you go down to your local watch battery and strap monkey, and get it resized there for the sake of 10€. Will save you all of the above 'experience' Quote Link to comment Share on other sites More sharing options...
dkaoboy Posted August 28, 2008 Report Share Posted August 28, 2008 I just received the bargain 16 piece watch tool kit from Amazon last night. Even with the tool kit, it took me 3 hours to resize the bracelet. Basically its those darn tubes in the center that make it so difficult. Another problem is the alignment. Each link has 2 sections to get through, so you have to make sure the resistance of the pin is from just the tube alone, and not because your pusher pin is stuck against one of the link sections. Quote Link to comment Share on other sites More sharing options...
fakemaster Posted August 28, 2008 Report Share Posted August 28, 2008 They are a [censored] and a half. But with practice. Quote Link to comment Share on other sites More sharing options...
Ray T Posted August 28, 2008 Report Share Posted August 28, 2008 They are a [censored] and a half. But with practice. with the proper tools, you can resize it pretty quickly, i was able to do mine in about 30 seconds per link or so Quote Link to comment Share on other sites More sharing options...
Rolexman Posted September 2, 2008 Report Share Posted September 2, 2008 The Aquaracer is a [censored] to size. I had to make my own tool by sanding down a jewelers screwdriver so thin it fitted the hole in the bracelet (and the tube inside). Then a small hit from a 3kg hammer and voila.. out comes the pin LOL. Look HERE. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.