16610 O-ring part numbers

[blue_sphere]

Lets face it the rep ones are pretty bad (far too thin). That being said what are the part numbers for the two o-rings connecting to the case? Im looking for the following two:

The o-ring between the retaining ring and the case.

The o-ring between the caseback and the case.

[im2]

Which is your watch? I mean, the certain o-ring in my Euromariner and Wm9 is not thin at all.

I ve tested my modded wm9 diving to 18m deep after i have had applied bergeon silicone grease on the o-ring during modding and everything went fine. I ll do the same with my Euromariner. Too bad i wasnt able to take some underwater pics with wm9 , but i hope ill do with my Euromariner. I am saying all these because the use of the o-ring you mention is to waterproof the case, so my example shows that at least the wm9 did it well! (with the help of some grease of course..)

[blue_sphere]

Well Im hoping to go beyond just the 50m waterproof rating. I will be taking it to a dive shop to be pressure tested to 300m. That being said the rings seem very thin to me.

[rosnik]

Test with this Rolex code:

29-325-10

[im2]

Well Im hoping to go beyond just the 50m waterproof rating. I will be taking it to a dive shop to be pressure tested to 300m. That being said the rings seem very thin to me.

I would be very glad to hear the results my friend!!!!!

[bertieng]

Test with this Rolex code:

29-325-10

This is for the case back only. Not sure if it is the same size for the retaining ring.