blue_sphere Posted November 7, 2008 Report Share Posted November 7, 2008 Lets face it the rep ones are pretty bad (far too thin). That being said what are the part numbers for the two o-rings connecting to the case? Im looking for the following two: The o-ring between the retaining ring and the case. The o-ring between the caseback and the case. Quote Link to comment Share on other sites More sharing options...
im2 Posted November 7, 2008 Report Share Posted November 7, 2008 Which is your watch? I mean, the certain o-ring in my Euromariner and Wm9 is not thin at all. I ve tested my modded wm9 diving to 18m deep after i have had applied bergeon silicone grease on the o-ring during modding and everything went fine. I ll do the same with my Euromariner. Too bad i wasnt able to take some underwater pics with wm9 , but i hope ill do with my Euromariner. I am saying all these because the use of the o-ring you mention is to waterproof the case, so my example shows that at least the wm9 did it well! (with the help of some grease of course..) Quote Link to comment Share on other sites More sharing options...
blue_sphere Posted November 7, 2008 Author Report Share Posted November 7, 2008 Well Im hoping to go beyond just the 50m waterproof rating. I will be taking it to a dive shop to be pressure tested to 300m. That being said the rings seem very thin to me. Quote Link to comment Share on other sites More sharing options...
rosnik Posted November 8, 2008 Report Share Posted November 8, 2008 Test with this Rolex code: 29-325-10 Quote Link to comment Share on other sites More sharing options...
im2 Posted November 9, 2008 Report Share Posted November 9, 2008 Well Im hoping to go beyond just the 50m waterproof rating. I will be taking it to a dive shop to be pressure tested to 300m. That being said the rings seem very thin to me. I would be very glad to hear the results my friend!!!!! Quote Link to comment Share on other sites More sharing options...
bertieng Posted November 10, 2008 Report Share Posted November 10, 2008 Test with this Rolex code: 29-325-10 This is for the case back only. Not sure if it is the same size for the retaining ring. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.