Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Danies Craig and his Sub


FxrAndy

Recommended Posts

An exert from another article that can be found here

"Even if Omega named their new watch after James Bond and was willing to pay a bundle for the product placement, maybe the producers should respect the awareness shown by their star of the true legacy and history of their character. Throughout his time as 007, Sean Connery was equipped with the Rolex Submariner, which has just celebrated its 50th anniversary this year, and Ian Fleming clearly chose Rolex as the watch worn by his creation.

Link to comment
Share on other sites

This story is a bit old at this point (it made the rounds on TZ a couple of months ago), but, as best as anyone can figure, the word 'replica' was used by the interviewer (not Craig) to describe Craig's comments to him about the watch Craig was wearing during the interview. And, even if Craig had referred to the watch as a replica, he more than likely meant that, while being a gen 6538 (not a 6358, which is not a valid Rolex Sub model number), it was not the actual watch worn by Sean Connery in the classic Bond films.

And, for accuracy, it should also be noted that the strap fitted to Connery's 6538 was both too small (probably an 18mm (the Sub lugs are 20mm)) & not the standard 2-color striped NATO-style affair that many have mistakenly believed it was. Instead, Connery's Sub was fitted with a plain, flat 3-color (likely navy blue, olive green & crimson red - his (or Bond's) school or regimental colors) striped strap that slid between the springbars & along the caseback. Here is a better screenshot I took from Goldfinger that makes this quite clear (note the absence of any steel NATO rings on the strap)

connerygoldfinger6538wristie2.jpg

This is a strap style (the form, not necessarily the color) that was popular in the late 50s & early 60s, which is likely what Connery's Sub was fitted with

bondstylestrap0011.jpg

As you can see, it is a simple, flat strap. You slide it through the space between 1 spring bar & the case, route it around the caseback & then route it up through the space between the opposite springbar & case. So it sits between the caseback & your hand

bondstylestrap20091.jpg

Unfortunately, I do not have the correct Sub model (yet) or strap design, but here are some quickies demonstrating how this strap style looks & fits on a Sub

bondstylestrap20021.jpg

bondstylestrap20081.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...
Please Sign In or Sign Up