Guest Dr.TuB Posted January 15, 2009 Report Share Posted January 15, 2009 is it possible just to print one out and stick it over the existing datewheel that i have? maybe someone has them on a pdf file or jpg? i have an asian UPO but its got the white date wheel with black #s (its incorrect) and i would like to make it myself and fix this problem Link to comment Share on other sites More sharing options...
Flashman Posted January 15, 2009 Report Share Posted January 15, 2009 I am sure it is possible, but would be a lot of hassle and also might be too thick to fit the movement, could risk damaging the movement if it jammed. Maybe you could get an ETA datewheel from the suppliers (Ofrei or Cousins) would save a lot of time and risk. Link to comment Share on other sites More sharing options...
adrenalin Posted January 15, 2009 Report Share Posted January 15, 2009 Making your own datewheel overlay is NOT as easy as it sounds. Even if you have a high-res scanner and an equal quality high end printer and try to do it 'on the cheap', the resolution is just horrible. Especially when you have a cyclops with its magnification-- even on a good machine there is unacceptible pixilation. If you were to attempt to do your own, silk screen or some other form of paint is the only way to go. I dont have that kind of expertise, nor the time. Its just easier to purchase one elsewhere..... Good Luck, hope it turns out. -K Link to comment Share on other sites More sharing options...
Toadtorrent Posted January 15, 2009 Report Share Posted January 15, 2009 is it possible just to print one out and stick it over the existing datewheel that i have? maybe someone has them on a pdf file or jpg? i have an asian UPO but its got the white date wheel with black #s (its incorrect) and i would like to make it myself and fix this problem It's easier if you go from a piece with an overlay to changing the overlay than going to a piece ADDING an overlay. If you do the latter...you will need a thicker dial spacer to allow the datewheel to turn...but not so thick that you need a taller cannon pinion, etc. I believe it's been done before...I remember reading people doing this...but dont recall the success ratio. It all depends on your deree of pickiness too. Remember...there are some who notice asymmetrical chrono pushers on a Rolex 6263...and others who when explained what this is...can barely see it (me being one of them... )...or others who add thicker springbars to make things more accurate, or who shave down bezels on lathes to make them more accurate, etc, etc...while others take their watches out the box, wear, and enjoy them...no mods...no cares...all smiles. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now