The Mentalist Posted March 28, 2009 Report Posted March 28, 2009 Does anyone here know the best way to size a Chanel J12 ladies ceramic bracelet? The watch shop I normally use won't touch it for fear he might shatter the links and he may have a point. I recently had to send a watch back as the lug had snapped off. Just how durable (or not) are these ceramic bracelets/cases? I hear the gens are very tough and shock resistant but I seriously doubt the rep is the same type of ceramic with the same shock resistance. Is the J12 bracelet held together with the same pin/sleeve system as other watches? The links look like they have some kind of rivet in the end and the sleeve/pin goes inside this rivet.
ahchard Posted March 29, 2009 Report Posted March 29, 2009 It is actually quite easy to resize if you have the right tools... my watch shop broke the bracelet of my gf's one and when i got a replacement bracelet I resized it myself with no problems... Taking the pins off are easy... just need a pin pusher tool... push the pin out and resize it... the hard part is putting it back together without breaking it... dont use the small hammer that comes in the watch tool kit as it will break the ceramic... all i did was fit the pin in with my fingers till it is still sticking out, but instead of using a hammer, i used my tweezer in my tool kit... used the flat side and pressed against the pin... that way you get more leverage and it wont break the bracelet.... i basically rested the bracelet on the table and used both hands one holding each side of the tweezer and pushed down... Hard to explain but hope you get it... pm me if you have problems understanding...
The Mentalist Posted March 29, 2009 Author Report Posted March 29, 2009 It is actually quite easy to resize if you have the right tools... my watch shop broke the bracelet of my gf's one and when i got a replacement bracelet I resized it myself with no problems... Taking the pins off are easy... just need a pin pusher tool... push the pin out and resize it... the hard part is putting it back together without breaking it... dont use the small hammer that comes in the watch tool kit as it will break the ceramic... all i did was fit the pin in with my fingers till it is still sticking out, but instead of using a hammer, i used my tweezer in my tool kit... used the flat side and pressed against the pin... that way you get more leverage and it wont break the bracelet.... i basically rested the bracelet on the table and used both hands one holding each side of the tweezer and pushed down... Hard to explain but hope you get it... pm me if you have problems understanding... Thanks for that. I kind of suspected that the ceramic was prone to shattering. I did use a pin pusher tool but it snapped the pin on the tool so I'm going to take it to a watch shop and hope they don't hammer it. I'll pass on your tips.
rogerthat Posted March 29, 2009 Report Posted March 29, 2009 I own 3 ( wife ) Broke my pin tool on the first went to a mall kiosk and they hammer away Best $5 I ever spent and no issues Went back there the other 2 times as well each time different $8 an hour employee too so I wouldn't sweat it This bracelet is just not worth the hassle to do it yourself let the mall kiosk folks do it I have personally sized all of my other bracelets but I won't touch these
kamber Posted February 8, 2010 Report Posted February 8, 2010 The end link just broke on the one i just got, so don't have a spare! F*cking piece of crap!
nikki6 Posted February 8, 2010 Report Posted February 8, 2010 That's weird, mine has all screws for resizing?!? Not a pin anywhere that I know of! Sixx
kamber Posted February 8, 2010 Report Posted February 8, 2010 I love screws, the Rolex was so lovely to resize, unscrew, gentle pull happy days, glides back in screw it in and sorted! These have funny pins i had to drill a hole in my pin pusher to allow the fat end of the pin to pass through the pin pushers gap!, Do you have the 33mm Quartz version? That's weird, mine has all screws for resizing?!? Not a pin anywhere that I know of! Sixx
ubiquitous Posted February 8, 2010 Report Posted February 8, 2010 Yep... Ceramic breaks! Mrs. Ubi can attest to that! J12 #1: J12 #2: Thankfully we have spares and spares of our spares!
kamber Posted February 8, 2010 Report Posted February 8, 2010 Ubi, Yeah :-( I don't have spares yet, so i did the next best thing, it was the square end link that snapped when it got wedged when i tried to put the link back together, so i've super glued it, very carefully and it seems to be ok, only a very very small noticeable hairline crack on one part noticable and thats if you take it off and are looking for it. Hopefully it'll hold and the whole watch won't drop off her wrist, else the whole thing will probably shatter :-( No. 2 there is IDENTICAL to where ours snapped!!!! What other ladies watches do you recommend mate? Yep... Ceramic breaks! Mrs. Ubi can attest to that! J12 #1: J12 #2: Thankfully we have spares and spares of our spares!
ubiquitous Posted February 8, 2010 Report Posted February 8, 2010 kamber, If I have a spare clasp end link, I'll send it your way. I will have to check the spares though. As for ladies watches... Errrr, there aren't too many that I keep current on, mostly because the vast majority have CZs on them or other frilly stuff. Mrs. Ubi is a minimalist when it comes to watches, so she likes plain, simple SS or ceramic, no 'diamonds' or bling. For the time being she's content with her J12, and I'm currently building her TW Best ladies DJ into a franken... In the past, she's tried the 40mm PAMs: Just a bit too big and top heavy for her liking though. None the less, that might also be a nice option
kamber Posted February 9, 2010 Report Posted February 9, 2010 Thanks mate I would really appreciate that. Yeah my Mrs is the same likes them minimalist without all the bling bling. :-) kamber, If I have a spare clasp end link, I'll send it your way. I will have to check the spares though. As for ladies watches... Errrr, there aren't too many that I keep current on, mostly because the vast majority have CZs on them or other frilly stuff. Mrs. Ubi is a minimalist when it comes to watches, so she likes plain, simple SS or ceramic, no 'diamonds' or bling. For the time being she's content with her J12, and I'm currently building her TW Best ladies DJ into a franken... In the past, she's tried the 40mm PAMs: Just a bit too big and top heavy for her liking though. None the less, that might also be a nice option
opti Posted May 26, 2010 Report Posted May 26, 2010 you need a pin pusher, ill draw up some instructions in a bit...
Tourbi Posted May 26, 2010 Report Posted May 26, 2010 (edited) you need a pin pusher, ill draw up some instructions in a bit... Thanks! I´m waiting Edited May 26, 2010 by Tourbi
opti Posted May 26, 2010 Report Posted May 26, 2010 ok here it is, ps mods I think this magnificent piece of art should be pinned If there is anyhitng thats confusing tell me and Ill refine the model
Tourbi Posted May 26, 2010 Report Posted May 26, 2010 (edited) Excelent opti! Many many thanks! Edited May 26, 2010 by Tourbi
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now