Duffy33333 Posted May 11, 2009 Report Share Posted May 11, 2009 Hi there, just started to assemble my new project. And..suddenly this small piece fell out of somewhere.. Any hints, where it could be from? Regards Andr Link to comment Share on other sites More sharing options...
dadog13 Posted May 11, 2009 Report Share Posted May 11, 2009 (edited) send me a PM with your e-mail address- I have a document that could be really useful for you Edited May 11, 2009 by dadog13 Link to comment Share on other sites More sharing options...
ubiquitous Posted May 11, 2009 Report Share Posted May 11, 2009 Looks like a gear to the keyless works, maybe? Link to comment Share on other sites More sharing options...
Duffy33333 Posted May 11, 2009 Author Report Share Posted May 11, 2009 Hi, anyone can see it missing here? Andr Link to comment Share on other sites More sharing options...
RWG Technical Posted May 11, 2009 Report Share Posted May 11, 2009 It's the crown gear from the keyless works. Remove the stem and insert it in place, then re-insert the stem. DO NOT remove the stem in anything but the WINDING position, this is why the gear fell out, nothing to hold it in place. If your unsure of where and how it goes into the keyless works, check out the ETA docs on their website with the breakdown of the movements. RG Link to comment Share on other sites More sharing options...
dadog13 Posted May 11, 2009 Report Share Posted May 11, 2009 I sent you an e-mail with a nice PDF document concerning the ETA2893 -1;-2;-3 movement(s)... judging from your last piece it could easilly be that the gear is from the keyless works... Link to comment Share on other sites More sharing options...
Duffy33333 Posted May 11, 2009 Author Report Share Posted May 11, 2009 Oh, how i love you all. When my GMT is working, i'll set my second time onto the Grandmasters timezone. @ Vlad: very helpful document but to recognize a 3D element from a 2D drawing. I'll eat now, the go on... Big Thanks Andr Link to comment Share on other sites More sharing options...
Duffy33333 Posted May 11, 2009 Author Report Share Posted May 11, 2009 (edited) Hi, back from dinner: So its part 410? Regards Andr Edited May 11, 2009 by Duffy333333 Link to comment Share on other sites More sharing options...
RWG Technical Posted May 11, 2009 Report Share Posted May 11, 2009 Excellent news. Remember, winding position only for stem removal. RG Link to comment Share on other sites More sharing options...
Duffy33333 Posted May 11, 2009 Author Report Share Posted May 11, 2009 (edited) Hi Zig, i knew this but thought, i already would be in second position. Hard to see without hands... but dor the next time i know. Is it normal, that the "wheel" spins further, although in second position? Regards Andr Edited May 11, 2009 by Duffy333333 Link to comment Share on other sites More sharing options...
Duffy33333 Posted May 24, 2009 Author Report Share Posted May 24, 2009 HI, so my new caseback and the GMT hand arrived and again, i am assembling. So on my 2893-2 seem to miss some parts, toseen here with number 251 and 498. Can anybody source them ? Regards Andr Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now