frankies Posted August 10, 2006 Report Posted August 10, 2006 So Which tool do i need to open the back case of 4th gen PO? I tried to open it w/ a screwdrive (pried it) and it didn't work. What I got is some scratches on the case I'm just wondering if this is the right tool to open the back case? case opener Thanks in advance guys
Pugwash Posted August 10, 2006 Report Posted August 10, 2006 I'm just wondering if this is the right tool to open the back case? Sorry, I got sidetracked in Photoshop preparing this pic. My apologies if it's a bit arty farty. From left to right ... eBay, Narikaa, Precious Time. The one on the far right is the least likely to leave marks, but if it's really tight, the one on the left is probably best.
leitztozeiss Posted August 10, 2006 Report Posted August 10, 2006 A big ball of sticky duct tape . . . seriously, it usually works for reps.
rbj69 Posted August 10, 2006 Report Posted August 10, 2006 all those will/should work even that one on ebay u show but i wouldnt put much torque on them cause more than likely they will slip and or gnarl your cut out edges some, but should be fine just to remove and tighten down lightly but not too tight ok joe
andreww Posted August 11, 2006 Report Posted August 11, 2006 I use my kids rubber bath toy! Just make sure you remove the bracelet from one side so you can get some leverage. You can also use rubber dishwashing gloves. BTW, in case you didn't realize, the back DOESN'T PRY OFF. It actually screws into the body of the watch. Honestly though, if you are trying to pry the back off with a screwdriver, it's probably better that you don't get it open!
frankies Posted August 12, 2006 Author Report Posted August 12, 2006 Thanks for all the suggestions guys
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now