Anybody recognize this movement

[Jaco]

I want to remove crown to remove movement - any advice from anybody familiar with this movement.

Thanks

[POTR]

I can't tell from the photo if it is a button or a screw, but...

If it's a button, push it while pulling on the crown...

If it's a screw, 1/4 or 1/2 CCW turn with a 0.6mm driver should release...

... unless it's a really tiny hex head stud ...

and... isn't there a Movement Q&A section somewhere down there? \/

[ricardo]

its a button and you MUST push it in with a very tiny pin

[POTR]

But I prefer a big chisel and hammer...

[TeeJay]

As above, it's a button, and you just need to depress it gently, then you'll be able to pull the stem out Best of luck

[Jaco]

It was a button - thanks guys.