Jaco Posted May 31, 2009 Report Share Posted May 31, 2009 I want to remove crown to remove movement - any advice from anybody familiar with this movement. Thanks Link to comment Share on other sites More sharing options...
POTR Posted May 31, 2009 Report Share Posted May 31, 2009 I can't tell from the photo if it is a button or a screw, but... If it's a button, push it while pulling on the crown... If it's a screw, 1/4 or 1/2 CCW turn with a 0.6mm driver should release... ... unless it's a really tiny hex head stud ... and... isn't there a Movement Q&A section somewhere down there? \/ Link to comment Share on other sites More sharing options...
ricardo Posted May 31, 2009 Report Share Posted May 31, 2009 its a button and you MUST push it in with a very tiny pin Link to comment Share on other sites More sharing options...
POTR Posted May 31, 2009 Report Share Posted May 31, 2009 But I prefer a big chisel and hammer... Link to comment Share on other sites More sharing options...
TeeJay Posted May 31, 2009 Report Share Posted May 31, 2009 As above, it's a button, and you just need to depress it gently, then you'll be able to pull the stem out Best of luck Link to comment Share on other sites More sharing options...
Jaco Posted May 31, 2009 Author Report Share Posted May 31, 2009 It was a button - thanks guys. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now