jmb

Looks good!  And, it's a "real" low-beat movement!

Not a car, but...

Great job!

On 4/12/2018 at 10:21 PM, RageRover said:

JMB/Justin,

NICE job!  If you don't mind me asking, what case are those pics of?  Cartel? Other?

 

Is it from the case you said you did a LONG time ago?

 

What I'm trying to get at is it a cartel case?  I'm sort of assuming if it's a Yuki, Phong, etc you wouldn't be installing the valve.  Those (expensive) cases have a usable valve.

I have no idea, it was for a member a long time ago.

I installed one of the functional Yuki valves for bro. woof a long time ago - exactly like the Rolex item.  It was a bit nerve-wracking but I got through it.  But, it's not a project to tackle with a hand drill unless you are going to "cheat" like Automatico did!

The "Certified Cheap Ba$tard" in me says "Bravo, a job well done!"

All kinds of different watch related terms explained.  Of course all of us here already know all of them...

https://newatlas.com/watch-terms-glossary-technical-reference/53691/

I'm glad Nanuq volunteered to take this project on as I'm broke...

I don't think it would be feasible as the "Rolex" DW is wider than the ETA DW.  I suppose maybe a very thin (.oo6" or so) blank brass ring could be bonded to a standard ETA DW and then be printed but unless thousands were sold it would be a helluva lot cheaper to do a good DWO and then futz around with the alignment.

Sweet!  Did the case require any mods for the movement to fit?

I don't think "complication" is the issue.  Although I would love to see the 1570 repped I understand why they don't do it.  Parts suppliers tell me that most factories are primarily interested in producing what is "hot" right now and don't put much priority on "vintage" stuff.  This was the reason I was given to explain why I had to wait 8-10 months to get my last batch of 2824 DJ cases.

That being said if there is a petition going around to present to get a 1570 repped I'll gladly sign it!

I don't think a T12 would fit a 36mm case, it would the 34mm.  So a dial and a T22 would give you a passable Explorer.

I had to switch to "Alternate" theme to be able to post or reply to anything...

"Sup, Gio!?  Have missed your photo-shoots the past couple of years, you run out of "girls?"  Nah...   

I think you could probably replicate any of the older ones to a gnat's a$$ and not have any problems as long as they (mid-case and back) are sterile.  If somebody wants it engraved they can have that done later...  The initial setup (jigs, fixtures, etc.) and programming will be the killer but once that is paid for each rough machined case shouldn't be too expensive.

For a minute I thought you wuz callin' me a ho! 

Two-toning it will be pretty easy if you have access to a lathe.  Chuck it in the lath, spin it up, and apply a Scotch-Brite (or fine sandpaper) to the section you want "silvery" and you're done!

Ho, ho, ho to everybody on the forum!  Merry Christmas!

Welcome back to the land of the living!  Oh, and Nanuk still vintagizes his watches by running over them in his driveway so I guess nothing much has changed! 

Either.

takes the same crystal and bezel as a 1601.

Yeah, I was a bit surprised to not see a few tire-tracks on that one.  I commend you for your restraint!

12 hours ago, Nanuq said:

*cough* too much?

Always a pleasure to see your "lightly" vintagized watches!

You will need a .108" or .110" drill bit to drill out the hole before tapping.