t

Hi the "plain" movements was full of dirt and dust (old stock movements)... not acceptable the "TOP" movements was 30% more expensive as agreed... to expensive!!!! i have bought the 6498-2 movments only... not bad with the "Glycudur" balance, the complete blue screws (without the silver slot) and the finer wheels... but this movements comes directly from ETA and not from SOPROD... the SOPROD 6497-2 movements have the additional "Perlage". If you guys would arrange a "group buy" with 100 movements... i could order the closest Version of the 6497-2 TOP with Perlage i would like to see a pic of the genuine PAM movements (Pre-V Version without swan neck and PAM bridges) here a pic of the 6498-2 TOP

Sorry guys the price was higher as agreed so i have cancel the deal...

Sure will have one tube for you left... but generally the crowns comes without tube and the tube is not available for sale...

Why you need a tube??? the disassembling and assembling of the tube is very difficult and you need special watchmaker tools...

the crowns comes without the crown tube because you don

I will post a picture on Thursday/Friday when i have them in stock no H3 cannion pin... but i can install a H3 cannion pin + H3 hour wheel on the movements for extra costs

i have order 500 of the 6497-2 movements. But the standard plain version without decoration. Movements are 100% SWISS MADE and with the 21.600 A/h high beat + more power reserve. Same like used by genuine PANERAI. I don

... because of the "hand made" stems you need to calculate a delivery time of several weeks for the spring loaded crowns... the delivery time will go up to 6-8 weeks for the general order process pre-orders until 01. July: delivery time 3 weeks pre-orders starting 01. July: delivery time 4-6 weeks general orders: delivery time 6-8 weeks so if you have a project in the pipeline.... place an order a.s.a.p to get the crowns timely

prices are updated on another thread

My watchmaker will cut the half stem only... this is for the price of 20 Euro... a complete stem would be 40 Euro. German master-watchmakers are very expensive. I have try to ask the Asians for this work... but the Asians haven

shi*t It were so nice if the stem adapter would fit because the stem adapter is available for less money and i would give this free of charge with the crown... but now sadly all people need to spend additional 20 Euro for the hand made stem still have no reply from ETA company... but seems they will not build a "custom made" Unitas 0.9mm stem for me

Hi Onycte please try to install the new "SL T48" with an 1.2/0.9 stem adapter which is in the box Maybe the crown could be installed witht he stem adapter (i don

guys... did you ever read my signature? crown order via email only: t_crowns@yahoo.de

i´ll take pre-order but i will ship the crowns out in 2 weeks because i haven´t them in stock at the moment... they will come soon and i will start with the shipping for the pre-orders and than will take new orders... for the first run of the new "SL T48" have produce a lower quantity... so please be fast and place your order... or wait for the second run of the "SL T48" in 2011 i have not produce a PVD Version of the new SL T48 but will do this in the next run (2011)... in the next run 2011 we can also upgrade this crown if we need an upgrade... in 2011 will also produce a "special" crown for all experts... this special crown will be with 1.2mm thread, thicker tube and 1:1 to the genuine but with higher price. for the newbies: most of the rep watches comes with incorrect or poor crowns... so RWG members have start a project to building a new crown which is closer to the genuine and better quality... in the first batch the T60 was build but with incorrect 60 theets.... in the second batch the T48 was born with correct T48 theets... in the latest batch now is the T48 upgraded with an spring like the genuine crowns (the older T60/T48 comes without spring)... the genuine PAM are all with spring loaded crowns. Most members use a upgraded crown for their watch and have replaced their poor crown which comes with the watch...

in 2 weeks you can place an order via email

I have told the manufacturer that they shouln

new spring loaded T48 crowns will be availabe within the next 14 days LIMITED STOCK ONLY non-EU members (USA, Canada, Australia, Asia etc.) will get the crowns for NET price and will not pay any taxes/duties as i ship it with low value declaration. European members from the EU need to pay additional 19% taxes (for "Merkel-Steuer"... new Prada shoes and Louis Vuitton bags for Sarkozy

read this thread sale will start in 2 weeks i have send 3 sample crown to few RWG members... still waiting for pictures... hey guys???? Where are the pictures of the new spring loaded T crown???

someone here who would like to have a spring loaded crown FOR FREE??? the only thing you need to do is... send me a PM and send us some pictures of the crown installed on your watch. i have 3 samples here FOR FREE

oncyte good point i think we should rethink if we make the crowns complete brushed... if the genuine is polished. May we make it polished but lesser... a complete brushed crown would have the sharpener theets but if i check the picture of the genuine crown from "oncyte" would spot that the theets are also a little bit beveled? more pictures of genuine crowns to comparsion would be welcome

may this comes from the polishing on the machine but the new crowns will not be polished any more... so this problem should be solved however, thank you for your opinion - good point!

@ babola the problem is the tube... the genuine watch case has a tube with bigger hole inside (2.5-3mm?) but the rep watch case has a tube with 2.0-2.2 mm hole only... a genuine crown wouldn´t fit in the rep tube and a T48 crown with thick spring loaded mechanism would´t also fit in the rep watch case... so i need to produce a crown with thinner spring mechanism and this is possible inside of the crown only... we would have 2 options 1) We produce a crown with 0.8mm dish depth and a thicker spring mechnism like the genuine... and would also need to produce a new tube to fit the rep case and the thicker spring mechanism. + this would be very close to the genuine and i would make all PAM experts happy... - only 5% of all RWG members could use this crown... all other 95% couldn´t install this crown + tube without a help of an watchmaker - this version would be the most expensive way... we would have the costs for crown + new tube + watchmaker costs 2) We produce a crown with a thinner spring mechanism which is inside of the crown and a dish depth of 0.5mm + this would be simplest way and 100% of all RWG members could install the new crown by itself without a help of an watchmaker + this would be the less expensive because we have no costs for a new tube - this is not close to the genuine and not the best way for the PAM experts please don´t misunderstand me guys... i need to satisfy ALL members... so is 2) the best way for all and i will go on with 2) but for the PAM experts will offer you a SPECIAL T CROWN... with thicker spring mechanism + new tube + 0.8mm dish depth... i need your instructions and planing this one for end of the year. i hope now all people will be happy

Ok... we make the crowns complete brushed... so the theets would look sharpener like o the Titanium and PVD crown dish depth will stay 0.5mm.... sorry guys but the manufacturer told me that the dish depth of 0.8mm isn

I can make the crowns like you guys want it... i can make it in brushed... but i heard that the genuine crown is also a little bit polished? Isn

Hi RWG people today got a sample of the new "SL T48 SS" crown - the new crown is with 0.5mm depth (old one is 0.8mm depth). So it should fit tighter on the lever but will not fit on the V-CG here pictures with the old "T48 SS" crown side by side i am not an expert but from first view i would say that the crown is to much polished and the theets are to beveled? What you guys think? Should we produce the crowns with lower polishing or may complete brushed? I don