t

you can place an order when i have them in stock - not earlier i don

spring loaded crowns are in production first sample will have in 4 weeks all crowns are for 0.9mm stem... but i will offer Unitas stems with recessed 0.9mm thread. Sadly a 0.9mm thread for Unitas is not available from ETA. So i need to cut the 1.2mm thread to 0.9mm with an 100 year old watchmaker tool... by hand

i don´t think that everybody can drill the hole easily I need to build a crown who could installed by a noob, too. i know the long time members are very knowledgeable and could overwork the case/tube/crown... but this people are 10% only. 90% of the other guys can´t do it. 50% of my customers can´t install a simple T48 crown. Most of this people can´t remove the stem and many people don´t know how to open the caseback. So i need a solution who would help ALL - not the experts only. The noobs would buy a expensive "spring loaded" crowns and would pay additional high costs for a modder + shipping etc... all in all it would make this "crown update" very expensive for all this people. This is not what i am looking for. My intention is to build a "spring loaded" crown for a acceptable price and the convert should doable by EVERYONE. So i need a "easy" solution. I know many people think "WOOOOOW Mr. T selling hundrets of crowns and making ***** good money". But this is not my intention. For every new update on a crown i need to pay again the costs for the tools. Half of my profit goes to the German tax office as i am a official seller and sell all crowns with an official receipt. And i have a lot of paperwork for every order (invoice, customs declaration, packaging etc.) and try to ship all order out within 24 hours. All in all this is not a very profitable deal for me if i can´t sell "the maximum quantity" of crowns. And i can sell the maximum quantity of crowns ONLY when i build a crown who is useful for ALL people (experts and noobs). I am very sorry for the PAM experts who would like to see a "1.2 crown + perfect tube". But i prefer the more "poor" solution with the "0.9mm crown + 1.2/0.9 stem adapter". i hope all members agreed???? let me know

thank you Drulee this are the things i need. The inside diameter is to small... i know it because i have a sample case. I think the best would if we work with a stem adapter... i would produce 0.9mm crowns only and would install a 1.2/0.9mm stem adapter on it... so the crown is fixable on a 1.2mm stem this is the best way i could produce a tube with the crowns... but changing the tube is very difficult and all people would need a special tool.... working with a stem adapter is easy and everybody can do it with simple watchmaker tools what you guys think? is this the way we should going on?... 0.9mm crown + stem adapter? or you want another way? A new tube?

Friends, please don

If someone in the EU would send me all the different watch case: 1) CARTEL 2) DSN 3) 4) sorry i don

Thank you but a OEM crown/tube wouldn

Ok option 2 but are all tubes on the rep case the same? Is the tube on a CARTEL case the same like on the DSN case? I can produce one tube only coming with the crowns. And i need to be sure that all the tubes on all case are the same measurements. May any moddder (Vac, The Zigmeister etc.) could give us more info?

Hi RWG poeple long time i was away from RWG and had no time for my customers. I am sorry but i was very busy. I am working on the new "spring loaded" T48 crowns. The 0.9mm crowns are OK but i have a small problem with the 1.2mm crowns The tube on the rep case is 2.0 mm only (i have a sample case from PURETIME). A spring loaded crown is not available for a small diameter in 2.0mm. My question: are all rep case tube have a inner diameter of 2.0mm? Any other tubes existing? How much are the inner diameter of the tubes from DSN and other dealers? We would have 2 options to solve the problem: 1. all customers need to refinish the inner diameter of the tube to 2.2mm 2. I need to produce new tubes coming with the crowns option 1 is very badly but option 2 would make all more expensive. some ideas how we could solve the problem?

T-hands

2 different measurements. One fitting Unitas. Other fitting Molnija. 3646 blue hands set (hour and minute hand without lume) 6152 gold hands set (hour and minute hand without lume) Price 25,00 Euro (EU 29,75 Euro)each set + shipping 10,00 Euro (EU 5,95 Euro) - combined shipping order via email to t_crowns@yahoo.de

May not close to the genuine but much better looking as most of the rep crowns T60 crown (with in-correct 60 theets - correct is 48 theets like the T48 crown) available in SS or Titanium (real titanium) for: manual wind 6497 movement (1.2mm stem size) auto ETA movements 2824,2836,2892,2893 (0,9mm stem size) asian movements 7750 and many more (0.9mm stem size) price 10 Euro (EU 11,90 Euro) (manual wind crowns incl. replacement stem) + shipping 10 Euro worldwide (EU 5,95 Euro) (combined shipping) here some samples with T60 crowns

A Noob makes his first experiences with Reps... Reps are nice looking Timepieces for 1/10 of the genuine prices... but this is the other side of story you are a young guy... it is ok when you buy reps... you love watches but you have not the money to buy a genuine... sadly not all people are rich and can buy this expensive genuine Timepieces.... may one day you can afford a genuine watch... do it... but at the moment you need to live with reps... and with their flaws... not all reps have this flaws... but most of them... and you can never be sure to get a perfect Rep... you need a little bit luck too

Hi Guys all crowns are been shipped. I am sorry for small delay but i was totaly busy with the crown orders. Normaly i ship all parcels out within 24h after payment. But i had so many orders that some people had to wait 3-4 days. As a official dealer here in Germany i need to write official receipts for all orders for the German tax authorities. And this is a lot of paperwork. Most dealers on this board don´t do this and don´t pay their taxes. But i do it. I don´t send the receipts with the crowns to avoid duties/taxes when your parcel arrived on your local tax office. But if someone need their receipt let me know and i will send it via Email or Fax. For all EU based members. Please don´t ask me if i sell my products without taxes. I don´t do it. All EU based members need to pay additional 19% taxes. This are the rules within European Union. Thank you for your patient regards T

T48 SS for 6497 movement is SOLD OUT discontinued prices for last crowns prices for non-EU members (USA, Canada, Asia, Australia etc.): T48 steel - 20 Euro *****available in 0.9mm only ****1.2mm SOLD OUT**** T48 titanium - 25 Euro T48 PVD - 30 Euro T60 steel - 15 Euro T60 Titanium - 15 Euro extra ETA Unitas 6497 1.2mm stem - 5 Euro extra ETA 28xx 0.9mm stem - 5 Euro + shipping costs - 10.00 Euro (one time if you order 1 or 10 crowns) ************************************************ prices for EU-members (Germany, Austria, UK, Spain, Netherlands, Poland etc.) T48 steel crown - 23.80 Euro (incl. 19% taxes)*****available in 0.9mm only ****1.2mm SOLD OUT**** T48 titanium crown - 29.75 Euro (incl. 19% taxes) T48 PVD crown - 35,70 Euro (incl. 19% taxes) T60 steel - 17,85 Euro (incl. 19% taxes) T60 titanium - 17,85 Euro (incl. 19% taxes) extra ETA Unitas 6497 stem - 5,95 Euro (incl. 19% taxes) extra ETA 28xx stem - 5,95 Euro (incl. 19% taxes) + shipping costs 5.95 Euro (one time if you order 1 or 10 crowns)

30x SS T48 for 6497 are only left take your last chance....

guys, i got your emails and your orders + payments thank you i will not respond or confirm any payment... i will ship out all parcels on 02. Jan and will left the tracking number via PP thank you T

you can not build one crown which will perfect on all CG The T-crown is special made for the better CG like the V-CG... but will not fit perfect on the standard reps with standard CG, because the standard CG have to much space between case and CG.

Only few T crowns are left I will not produce any more The last batch will sell for a special price starting from 01.01.2010 Net price for all international customers outside of the European Union. Customers within EU must pay plus 19% taxes. T48 SS crowns *20,00 Euro (EU 23,80 Euro) T48 TI crowns *25,00 Euro (EU 29,75 Euro) T48 PVD crowns *30,00 Euro (EU 35,70 Euro) 1.2mm stem for 6497 * 5,00 Euro (EU 5,95 Euro) 0.9/0.9, 0.9/1.2 stem adapter *5,00 Euro (EU 5,95 Euro) Shipping one time *10,00 Euro (EU 5,95 Euro) I will guarantee that all crowns will be shipped out 24h after payment. All parcels will be shipped reg. and with insurance (money back when the parcel lost on the way) order via Email t_crowns@yahoo.de send me a email and i will reply with the order instructions regards T

very good news... i have only few T crowns left and will not produce any more. Your new Palp crowns will help the community. Good luck with your sale my friend.

go for it the RGM diver is one of the best on market

looks like the RGM diver case

All Cortebert hands set are shipped out today Unitas and Molnija hands will be ready in 6 weeks price Unitas hands set: 40 Euro each hands set price Molnija hands set: 50 Euro each hands

Hi Cortebert hands are on the way to me and should arrived in a day or two I will ship all hands out to the customers end of the week So every customer should received their hands within the next 10-14 days thank you for your patient... thank you for business If someone is interested i have 5 sets each model left Also producing same hands for Unitas and Molnija for a lower sale price regards T

Guys i am a little bit confused I have check the 3601 and 3602 movements and have this size for the hands 3601 - 1.90 and 1.00 3602 - 1.90 and 0.95 ??????????? could someone please check their movements? If we will not find the correct size... we can not build the hands. I will not produce this hands in a wrong size... if you realy interested in this project... please help me out"!