HR911

Here's a realistic request from me.... How about the Ginza ROO LE in SS? Can't be that hard can it? http://news.watchprosite.com/?show=forumpost&ti=732538&fi=112&s=0Ta That all black dial looks lovely.

These are outstanding photos....you have some skills with a camera. I've ordered one too, so the waiting begins for me too. Please feel free to take and share more lovely photos!

Hi Scouser, The watch was originally bought by me, and suprised to see it has been flipped so quickly! It is a lovely watch and I remember looking at the seconds hand and thinking it was actually quite smooth. I personally wouldn't service it for atleast 6 months. This model ROO is one of the latest ones and has the updated grey dial with correct inner bezel and darker numbers so it does have the extra jewel. (I asked Josh this to make sure) Wear it in good health!

Way too expensive!!!! You can get the same watch from the recommended dealers on the forum for almost half that! Around $488 plus delivery is what you will pay. So don't buy from this guy

Looks great....what is the crown guard lever like? Is it floppy or tight when you open the lever?

Guys, I also have a Eurotimez DSSD V5 I bought last year and this happened to me too. There is a simple fix to this which I did at the weekend. - Unscrew the caseback - Put the centre case back (the grey bit) into the oven for about 3 minutes to heat it up - Take it out and let it cool down to a slightly warm - Spray dark grey car primer on it (it's nearly exactly the same colour) - Put it back in the oven at 250 temp and let it cure for 10 mins - Take it out of the oven and let it cool and then put back on the watch And there you have it!....it's really that simple

A great tip to get the dirt out is to get a cloth and dab some alcohol....I used some vodka...and wipe over the letters and the dirt will come off :-)

Is it possible to order a Fiddy dial from Eddie Lee?? How do I get in contact with him?

Hi Pete, Thanks very much but I've found a service by Fine DD on RWI that will remove the AR and likely put his own AR on. So happy days!

Hi Pete, Thanks for your reply....you have a beautiful watch too. My AR coating will be on the inside though won't it?....I thought the fiddy's all had the AR coating on the inside only? I can't even get the movement out at the moment as my screwdriver set doesn't seem to suitable.

The watch looks awesome.... I have a PAM 127 too and have sent the CG to The Zigmeister to have a new flat pin inserted and lever stiffened up. How did you remove the Blue AR??....this would be my final thing to do..... Thanks in advance...

Wow!! I have a PAM 127 aswell and the 2 things that spoil mine are the blue tint on the sapphire glass and the slightly blobby CG pin. That looks perfect!!....wear it in good times. Where is Zig based??

Hi all, I have a lovely PAM 127 which is perfect aside from the CG pin mod. I have read tutorials on how to do this but I'm not really the DIY type! Does anyone know of any modders in the UK that could do this?....ie...flattening the pin to be flush with the CG guard, and stiffening the lever. I am actually in Las Vegas next week, so if anyone knows anyone near there that would be great too! Thanks

I cannot wait to get mine!!!! It's shipping to me today or tomorrow....will post pics when it arrives :-)

Fantastic photos.....it's a lovely watch. My DSSD V5 is almost ready to ship (Waiting for site to fix itself so I can approve the new pics) If it's like yours....I'll be very very happy! Thanks for posting

Same thing happening to me right now and want to approve my pics....not working in IE or firefox....how frustrating!! Have posted a message on their forum area to alert them. Hopefully they'll fix it soon. Looks like we've all ordered V5's!

Hi all, I am trying to look at new pics of my watch on Eurotimez but have encountered a problem. When you load the homepage, the box in the middle (XML) should load but it doesn't, just a blank box with the words undefined. It was working for me yesterday so I can't understand what's wrong.....is this happening for anyone else? I know that this content doesn't load when I'm at work as they have a firewall but I can't think of a reason it would stop working on my home laptop.... This is really frustrating as these are second set of photos after a QC issue and I really want to keep things moving.

I had one of these, and they really a good quality piece. The 2 things that are wrong are that firstly the metal studs on the bezel should be smaller and polished (not brushed) The smaller error is that the "Swiss Made" should be under the 6, not either side of it.... If they make one in future like this, I'll definitely get one. They look beautiful with a custom leather strap (like dark brown) with olive stitching. Also the bezel tends to be loose and centre properly.....

Hi Neo, Thank you. I sent an email to you from my hotmail account to your gmail address given above at around 2.30am GMT today. Hopefully you got that? Kind Regards, Hasan

Hi Arthur, I ordered mine about 2 weeks ago so it's not the one that has just been announced on their site. I'm hoping that I can get them to send me that one as they haven't shipped out to me yet. What is a bit concerning is that they haven't answered my emails for 3 days now. Does anyone know if they respond to emails on a weekend?

Hi all, I've been a member over on another rep watch forum for around 4 months now and have really been bitten by the rep bug. Recently I decided that I wanted the Rolex DSSD V5 to add to my growing collection, and Eurotimez kept coming up as the dealer to go for (Even though they aren't a trusted dealer on that site) After reading the glowing reviews of their V5 Best Version DSSD from GioArmani, I decided to pull the trigger. Everything has gone very well so far, and after the pic reviewing stage there is a QC issue with the caseback which I'm waiting to hear back about. When this is resolved, I look forward to posting photos! Thanks :-)