marlin22
-
Posts
309 -
Joined
-
Last visited
Posts posted by marlin22
-
-
Very nice build, excellent case work, congrats!
-
Hi Everyone,
After over 4 years and over 200 127s later I am finally finished with my order queue. I can now concentrate on selling complete builds on my section, I will also put them up in the M2M section every once in awhile.
Now have more time to experiment with other types of builds as well as vintage builds. I can contribute more time to help the rep community contributing more time to the forums. And last but definitely never least, I will also have more time to dedicate to my own family who has been very patient with me.
Want to thank all of you who have been so patient throughout the entire time, some of which had to wait a year. For those of you, and there are many, who still own the watch I built you, wear it in good health and I hope it has brought you joy!
Here is the last build in the queue, she’ll be headed to Singapore…
-
1
-
-
Hi Guys
newbie here been sitting in the sidelines for a while doing lots of reading and more reading. now im looking to pull the trigger of my first true decent rep, my rep of choice is the 111n v3 but I am unsure if noob or h is the way to go, Toro has the Noob and Andrew at Puretime has the H. I have read a few H vs Noob threads and it seems to even in % for both. Mark sorry to slightly hijack your thread but your watch is totally stunning so I thought it appropriate to see if Marlin had a view on H vs Noob and if all V3 need these mods.
again sorry for the slight hijack, and once again stunning watch Pal.
Go Noob....Remember the search button is your friend. This subject has been talked about at nauseum on all the forums.
-
It's a V4 on a 6497-2 movement most obvious parts are the SN shape. MM screw, and SN screws, look at the set lever screw it is blue on the gen it is silver in color
-
Are you F'en, and people are bidding on this? WoW!! But wait there is more..
http://www.ebay.com/itm/Officine-Panerai-PAM127-Luminor-1950-Fiddy-LNIB-/251507874364?
-
It a Swiss movement originally fitted into the EL case with brand new PAM bridges curtousy of Marlin.
AJ
Actually this is far from the standard 6497-1 Swiss movements originally fitted into the rep watches, this is a true Swiss 6497-2 movement, the same as the one found in the gen but this has the rep bridges. Everything on the movement is gen ETA 6497-2 parts except for the bridges and swan neck components. If you look under the balance you will see the ETA stamp and the numbers 6497-2.
Hey AJ don't sell yourself short man, you have a winner here
-
1
-
-
No thanks necessary, the pleasure was all mine!! it's not everyday I get to deal with a true class act such as yourself
Enjoy that beauty..... -
Hi Guys,Here is the latest addition the The Vintage Series collection, it's not complete yet but I wanted to put up some progress pictures. This watch highlights all the different options that can be added to the VS line. It includes custom engravings throughout, custom painted dial (I will be making my own dials for these builds shortly), custom modded and engraved movement. Here are some progress pictures....more to come....Please note the watch is not complete, at the time I took the pictures it did not have the CG on and had not been polished yet...Custom painted and lumed dial in a classic brown. The hands were aged and lumed to match.
My All Asian modded movement with vintage custom engravings can be seen behind the custom engraved plexi. This modern movement makes this watch a daily beater and will be reliable for years.
Custom engravings through out the watch including between the lugs, solid case back(inside and out) and display case back on the plexi glass.
Here are the VS markings on the main plate under the balance, each VS will have its own unique number assigned to it.
Best part of all is this watch is reliable and robust, a true daily beater that will last for years to come...Cleaned, oiled and adjusted to the same specs as all my modern modded watches.
More to come......... -
Tomorrow I will try different stitching options, this was just a fast and dirty hand stitch to see how it comes together.
Here you can see some work still needs to be don on the text alignment.
-
I am currently doing some R&D on in house straps for my Vintage Series watches. They will have matching numbers to go along with the watch so it is all one package. I'll be using vintage leather so it will look of age. I am trying to keep as much as I can in house, so far I can do the movement mods, engravings, working on the dials and now the straps.....I hope to post a completed watch with all the VS parts in it soon.Here are some pictures of a practice run, this is using new leather not vintage stock. Sorry for the blurry pictures.... Still need to work out some kinks but I feel they are looking good so far...
-
Very nicely done, indeed, great skill
Thanks G, coming from you that is a great complement!
Amazing J! Hope all is well my friend!
Sent from my iPad using Tapatalk
All is well, very busy these days thanks my friend, I hope everything is good with you too!!
Amazing work!
When can I send you my 6152 for lug engravings? I don't mind being a guinea pig
For the time being I am only doing this on my builds I don't have enough experience under my belt to risk someone else's baby. I'll post when the service will be available. That said NightWatch above offers this service and more.
-
Here is the inside engravings for the build
-
Thanks for the kind words guys....
This is an old post many refinements have happened since then, including a new version of the Noob 127 with better movement bridge engravings
-
Just finished my first set of lug engravings for a 6152/1 build I am putting together. Tried my best to get them as close as I could to the gen engravings, I used many gen pictures to pick up the pattern of the different characters to try to mach them as bast as I could. This build is going to have many custom options on it including case back engravings inside and out on the solid case back and engravings on the plexi on the display case back. It will be running one of my modded 6497-2 movements with custom engravings shown in the last picture. Here are the picturesHere is the BREVET engravings with the main inspiration gen picture on top
Here is the SN engravings with the main inspiration gen pictures on top
The movement that will go inside, this will make it a reliable daily better and a very unique watch. I look at it as what Panerai would do if they wanted to restore an old timer with a new engine. Someone coined it akin to putting a new super hemi engine on an old school Charger...
-
1
-
-
Beautiful simply beautiful, and the pictures are spectacular!!!
-
So here is a little something I am playing with on the laser, one more addition to the Vintage Series build...Now please note this is only the R&D prototype the finished product will be better.Gen.
Prototype
-
Either put your fishing tackle in it or perhaps take your sandwiches to work?
I live in SFLA and this is what I use to store my tackle.......they don't call me "Marlin" for nothing.....;-)
-
I've got it! You could engrave my H Factory Ti case for a 036B build!
I wish, this is a 40 Watt Co2 laser which I am going to mod up to 60 or 80 watts. To even etch metal you need to go over a hundred watts and to engrave you need a fiber laser which is "mucho dinero"!
We'll need to think of something else......maybe a special line of straps to go with my builds??
BTW I am working on engraving the 036, just not with this.......
-
Strap it to the head of your pet shark and take over the world!
Now your thinking out of the box!!!
-
1
-
-
Just have a small handheld for pointing out stars or objects. Well with that??? - Explode a balloon..... engrave a strap....engrave a metal casing of a Panerai - vintage style?
Test out the lume at night after pointing at the watch with the laser?
It´s nice to have it in the first place! Enjoy:)
I think I'll try all of the above.........
-
Hmmmm
Laser in the house!
Now, I wonder what I am doing to do with this........ Any ideas??
-
i also give a try to engraved on asian 6497...
but the letters seems not thin as the reference pic of the gen
They look great to me!
I am now working on the 036 case engravings much harder due to all the angles of the case.
-
The edges on this one were not bad so I didn't do any reshaping. That said reshaping will not be easy because there are engravings where the reshaping needs to be performed.
-
Lovely!
Would you mind sharing more info about the 210?
Did you do mods? Case shape - I've heard of blunt edges...
Thanks
A
Hi A,
The 210 started as an H factory watch, I replaced the movement with one of my fully modded all Asian Noob movements and reassembled it. I replaced the movement because the H fac. movement has the text printed on the bridges and the Noob is engraved like gen. it is now a true super rep and a beautiful dress watch.
The vintage watches use the Silix case set, and they needed reshaping. You are correct the edges need to be thinned out. I also soldered the lugs to look gen and on the X Mas I added wire lugs to it and custom engravings to the case back. Both are using 6497 movements so they can be used daily with no performance issues. These were prototypes that I built for myself so I didn't use the best finished movements however on the production runs they will carry a fully modded and custom engraved 6497 in homage like the one below
Last 127 build in my queue is finally finished
in The Panerai Area
Posted
Working on several price options to make them more affordable and more available to members. I'll be posting them on my section.