jigelow

Dang! Those serifs!

So I've got everything together to test how it is on the wrist. The second hand seems to slip when I move my hand quickly. I'm thinking its just not tight on the pin. Would this make sense? Its a gen from a 16800. Is the pin thicker on the 3035 than on the 3135 or could the second hand just have loosened up with age? Any way to salvage the second hand or do I need a new one?

Yeah. It had the date spring replaced by misiekped for the previous owner. I guess the jumper needs to go, too.

Grease the orings and put it in water brother. She looks lovely

Thanks. Yeah, there's some bits I'll have to take care of like that. It'll come all apart once I figure out the date disc. I still can't get it to change over consistently. It seems like the finger that sits between the teeth doesn't want to spring back in to place to push it all the way to the new date. Keeps getting stuck between the two.

Not going to ever be the greatest, but it'll always be my first build and its in to the home stretch.

Thanks. I'm happy with the direction its gone, but I'm ready for it to be done and start wearing it!

I'm becoming intamately familiar with this piece. I've also learned that I have to work on my patience. I'm used to working around the house and muscling things together. Need to work on my finesse. Here it is with a quick test fit:

I wish this was a year ago. I'd have you order me a ST3135 case set and bezel assembly.

Scuse the noobishness, but is this just a traditional raffle? Like PayPal some money for a ticket raffle?

I'm in if I've got it right.

Bezel insert color change doesn't follow all the way through the "6".

Intersting. I picked up some Clark's for my build. I wonder how they compare.

I'm surprised no one mentioned Wolf. I thought they were they were the hot shi*. I know they have some great customer service stories I've read, but I have no experience with them.

So I didn't get around to taking pics this weekend. With the impending in-law visit coming in a few weeks, wife and I did all the Christmas tree hunting and decorating. In addition, I began my movement/dial assembly and buggered a retainer on for the date wheel (big thanks to misiekped for coming to the rescue). I did have time to look it over a bit more closely and everything checks out. I also removed one of the link screws and it is tapered before the thread, which I've read can be another tell if that's missing. It does appear the clasp lock had been replaced at some point as its a very slightly lighter color. Not enough to be a bother.

I will get some pics up this week for those following along from home.

Unf. Looks fantastic!

Got it. I'll wait to do that until I get the rest of my parts in. No sense in doing it now when I won't be fully assembling for a bit.

Thanks, mate. Let me know what I owe you.

I think the disc just needs sanding. I assume its the same technique as a bezel insert when shaving a bit off the diameter? Kind of wheel it along against fine grit sandpaper?

Tapped foot for date wheel is the closest thing I could think, but that sounds like one of the stationary studs. Its the rectangular screw retainer that should be by the "2" on the date disc.

What?

Sent from my iPhone using Tapatalk

The toggle bit that holds the date disc down popped off. It's the screw type that is across from the spring loaded retainer that holds the teeth.

Loose the screw holding the date changing wheel (just a bit) and tested

If that's doesn't work you have to play with date disc, some of them needs sanding

My phone is going to die

Will get back to check later

Sent from my iPhone using Tapatalk

I'll give this a shot.

That is, if I can find that damn toggle retainer. The thing popped off and has now disappeared. Anyone have a spare or know where to get one in the event I can't find it?

Yeah. It's a Yuki you put together for Aero Dave before he went gen 3135 so I know everything is aligned there. The date disc was brand new in blister from Ephry. This has to be user error, I just can't figure it out.

This is without the dial on. There would be no spacers as these are all gen parts.

I reseated the date disc, but didn't turn the swivel retainer and it seems to work fine. Not sure why the swivel retainer would be putting pressure on it or throwing it out of alignment. I'm going to have to investigate later when I have time. Has anyone else run in to this before?

Well only an hour in to my first bit of assembly and it looks like I've run in to my first challenge. The quick change date doesn't seem to engage properly. It will only turn the date like 75% of the way to the next one and then can't grab on to continue changing. Same issue when I set time and go past midnight. It seems like the date disc may not be in properly, but I've checked, rechecked, pulled it off, and put it on again. Its under all three retainers the spring loaded holder is in and the screw dealy is secured. Any ideas?

What are you building by the way ? and what will be the specs ?

See the thread below this one in the Rolex subforum. Started as a 16800, but has progressed to an early 90s trit 16610.

I can not wait to see the pictures I am also thinking about getting one or just build a Franken bracelet, with gen clasp, aftermarket 580 that I already got with PT 93150 links

Unfortunately, I don't have my build done and haven't even received the case, yet, so it won't provide full context.

I would just do that. Honestly, that's what I was planning. I saw this one on the bay and asked some questions. After I felt I got the answers I was looking for, I threw up a bid, not really thinking I'd win. Its funny since I got some 501s in a trade with Ephry. The bracelet came with 593s. They arrived the same day.