P4GTR Posted July 21, 2009 Report Share Posted July 21, 2009 The "perfect" or "classic" $250 stainless subs from Josh. The pearls are shot on both (mine and my fathers) I would like to get replacement inserts. Any recommendations where I can source one's that will fit without too much fuss would be greatly appreciated.. I'm not good at sanding perfect circles! Quote Link to comment Share on other sites More sharing options...
P4GTR Posted July 22, 2009 Author Report Share Posted July 22, 2009 Anyone? You guys just want me to order inserts that won't wind up fitting then have to sell them here cheap! Quote Link to comment Share on other sites More sharing options...
ubiquitous Posted July 22, 2009 Report Share Posted July 22, 2009 Typically, most inserts won't fit without some work. You're likely going to have to either file down the back of the insert, the O.D. or possibly both. Difficult to say for certain, as there's so much variation in both the rep Subs as well as aftermarket parts in general. Combining the two makes for an even more difficult situation. The only time I've had a simple no-mod fit was when I installed a gen insert to the gen bezel that I fitted to my old WM9 Sub. If all you're missing is the pearl, I'd say get some watchmaterial pearls and fit those to the existing inserts. You may need to expand the hole for the pearl, but that's much easier than modding the entire insert and/or bezel to fit. Quote Link to comment Share on other sites More sharing options...
P4GTR Posted July 22, 2009 Author Report Share Posted July 22, 2009 I like the watches but they're not worth frankening with the wok rehaut. So, thanks Ubi, that sounds a lot more suited to the situation and I'll go that route. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.