William Campbell Posted September 4, 2009 Report Share Posted September 4, 2009 I would like to buy multiple A7750s. This can get expensive, especially when they will all need servicing eventually. Let's say I have 4 watches. I like to wear my watch for long periods at a time, say 3 months. What if I pull the crown out on the watches I am not using, so they don't run? Then in 3 months I start one of the watches and wear that for 3 months, and so on. Wouldn't the watches last longer than they would if they were running during this time? Are there any disadvantages, can the watches be damaged? Link to comment Share on other sites More sharing options...
Ronin Posted September 4, 2009 Report Share Posted September 4, 2009 No need to pull the crown out, let them run down... This sounds like the winder debate, to leave running or not. If I follow your logic of "quarterly" wearing and swapping your watches. And for sake of argument, 3yr life expectancy on an unserviced A7750. That translates to: -Each watch worn 3 months a year. --Therefore, 4 years = 1 year running time per watch. ---4years x 3 (lifespan) = 12 years of probably being ok before a needed service or repair. I think that is what you are asking? Link to comment Share on other sites More sharing options...
William Campbell Posted September 4, 2009 Author Report Share Posted September 4, 2009 No need to pull the crown out, let them run down... This sounds like the winder debate, to leave running or not. If I follow your logic of "quarterly" wearing and swapping your watches. And for sake of argument, 3yr life expectancy on an unserviced A7750. That translates to: -Each watch worn 3 months a year. --Therefore, 4 years = 1 year running time per watch. ---4years x 3 (lifespan) = 12 years of probably being ok before a needed service or repair. I think that is what you are asking? Yes, very well put. Link to comment Share on other sites More sharing options...
RWG Technical Posted September 4, 2009 Report Share Posted September 4, 2009 Time is the factor, not if they are running or not. Oils dry up and turn acidic over time, they get gummed up and this affects not only the timekeeping but the potential for wear if the movement is running. Up to the point that they need to be serviced (5 years after the last service) it doesn't matter if they are running or static. After 5 years and once the oils are dried up, then running them will eventually damage them. Link to comment Share on other sites More sharing options...
Toadtorrent Posted September 4, 2009 Report Share Posted September 4, 2009 Word from the Master...'nuff said. That being said, I have a few reps I have no desire for Zig to do his magic on...I'll let them run dry, and replace the movement when the time comes, or sell it here for parts, and get a new "Next Hot Thing". Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now