Gatchaman Posted September 21, 2009 Report Share Posted September 21, 2009 Can a Rolex dial from a 16200 watch be fitted into a Tudor Prince watch? Quote Link to comment Share on other sites More sharing options...
alligoat Posted September 22, 2009 Report Share Posted September 22, 2009 Since I assume you're using an ETA movement, you'll have to cut the dial feet off the Rolex dial. The Datejust dial will measure 28mm plus some. First step would be to uncase the Tudor Prince and measure the dial. If it's the same as the datejust dial, you're in luck. Too much bigger or smaller and you're SOL. You'll also need a datewheel overlay since the ETA datewheel sits outside of the Rolex datewheel. Might also need a cannon pinion change if the overlay doesn't have clearance under the dial and you have to use spacers like dial dots. Minute and second hands also have to clear the markers on the DJ dial. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.