Jurgenk Posted September 25, 2009 Report Share Posted September 25, 2009 Got tired of waiting for some additional parts so I have proceeded to build this watch Here's how the 7753 looked as it came from GZ: Not bad, but flaws have been previously observed by me and others, extensively (wrong tachymetre, wrong depth bezel, wrong AR, wrong crown, wrong CG, wrong dial, DW-- everything but the movement) Last weekend I cased her up in a new old-school case from T4D/PWC, which accepts the 7753 with some reluctance, and requires some drilling of the movement ring to get the datepush function back online. I also added a T48 1.2mm crown, which gets very close to gen in this setting Whomever is modding the crown guards at Robert's suppliers' is doing a great job, it is really 95% there. The crownguard pin needs to be polished yet. I also like the depth, thickness, and precision of the bezel markings on Robert's watch too. This is really the best case I've seen for this project. Here are a few gens for comparison My to do list: Relume hands install gen dial install lello/leo 7753 DW polish sides of bezel, shorten bezel by 0.5 mm (it's actually too deep) polish crownguard pin single side AR on sapphire (debating, won't do unless I can get gen yellow color) Would appreciate your feedback Let me know if you want details on how to get the movement to sit right. Link to comment Share on other sites More sharing options...
Drulee Posted September 25, 2009 Report Share Posted September 25, 2009 Hmmm, where have I seen this before? By the way, I notice you mention the "Tachyme(tre/ter)" being wrong. It actually isn't, it just depended upon where you bought your genuine. North America, G.B. and some other English speaking countries had "meter", other countries (mainly Europe I believe) had "metre". Link to comment Share on other sites More sharing options...
StormTooper4 Posted September 25, 2009 Report Share Posted September 25, 2009 looking good, can I ask as I have never noticed before but are the chrono buttons "That" different? as your photos make them look very different ST4 Link to comment Share on other sites More sharing options...
Drulee Posted September 25, 2009 Report Share Posted September 25, 2009 looking good, can I ask as I have never noticed before but are the chrono buttons "That" different? as your photos make them look very different ST4 Different in what way? Link to comment Share on other sites More sharing options...
StormTooper4 Posted September 25, 2009 Report Share Posted September 25, 2009 Different in what way? Maybe just my eyes but in the top photo the buttons just seem to slope downwards where as the second photo and the gen the directions seems to turn much more inward on the edge of the button? If I had time Id cut the images and draw some lines on , but its POETS day and Ive had enough of the office today Link to comment Share on other sites More sharing options...
Jurgenk Posted September 26, 2009 Author Report Share Posted September 26, 2009 st4 you've picked up on the exact problem with the 7753 case that creates such a problem with the proportions of an otherwise nice rep with a great movement (aside from the tachymetre) The arc formed by the crown and chronopushers has to be continuous as seen in the gen on the left. The PWC/T4D case shown on the right has it pretty close once you put in a T48 crown at the right stem length. The 7753 case was way off in that regard and no amount of buggering with the crown or CG would fix that. Worse yet, its spacing and pushers were way off from standard dimensions and wouldn't take CGs from other cases Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now