blackbard Posted October 31, 2009 Report Share Posted October 31, 2009 Ok, My good friend watchlover just informed me that my 250 project may need to be reviewed because the dial I currently have will not fit the 7753 movement. What would you experts here need to know to verify that. The layout seems correct, and the case is the "proper" case for the Tri-Compax with the date pusher at 10:00. Can you chime in? I have a source for the gen dial but it is expensive and the seller has not forwarded pics yet for me to decide....I cannot tell much difference between the gen pics I have seen and the dial I have so I humbly request your assistance.... I'll post pics if that will help. Quote Link to comment Share on other sites More sharing options...
Francisco Posted October 31, 2009 Report Share Posted October 31, 2009 7753 has the DW in a slightly different position Quote Link to comment Share on other sites More sharing options...
cskent69 Posted October 31, 2009 Report Share Posted October 31, 2009 Yeah - you have to get a dial where the datewindow was made for the 7753. On the A7750 it is in the wrong place (more clockwise and closer in). A real 7753 is different. That is why these transplants are hard - you have to get the right hands too. Quote Link to comment Share on other sites More sharing options...
blackbard Posted October 31, 2009 Author Report Share Posted October 31, 2009 Thanks. Now on the hunt for a dial and hands. Can the 7750 hands be modified to fit? Quote Link to comment Share on other sites More sharing options...
cskent69 Posted November 1, 2009 Report Share Posted November 1, 2009 I actually believe that some of them fit but not all. Can't remember which one you have to come up with.... Experts can weigh in.. Quote Link to comment Share on other sites More sharing options...
R0cketwatch Posted November 1, 2009 Report Share Posted November 1, 2009 I actually believe that some of them fit but not all. Can't remember which one you have to come up with.... Experts can weigh in.. I have been looking for a dial, hands and case for the 250 or the 196 to fit a 7753 as well without much luck so far. I have many sets of hands that don't fit and a number of dials. All have the date window in the wrong place as they were designed to fit the A7750 and not the genuine eta 7753. The hands have different diameter post holes and so I can only get ones to fit the hour and minute large hands. The case was not too much of a problem, where did you get yours? I needed to modify mine for the 10 o'clock pusher. I filed the movement surrounding spacer and added a small piece of tube to fit over the existing pusher which was too short. My research leads me to believe that most of the "swiss" 250's and 196's must atually be clone movements as most of the parts I have found will only fit the "copy" movements. If you manage to find the rest please post it here! Quote Link to comment Share on other sites More sharing options...
blackbard Posted November 1, 2009 Author Report Share Posted November 1, 2009 Complete watch was purchased here. I have purchased the 7753 and am in negotiation for another dial. Seems the hands may be my last "requirement". After that, hopefully off to The Zigmeister for the work. I am not qualified to do this work, nor would I want to. I have a donor watch that has the movement, and I will probably want to swap movements to have two complete watches when done. Quote Link to comment Share on other sites More sharing options...
Bike Mike Posted November 1, 2009 Report Share Posted November 1, 2009 Anyone got a straight on shot of a Pam250 with A7750 they can post here. I have one of my 7753, I was thinking could be overlaid in made transparent in PhotoShop to show the DW location differences. Quote Link to comment Share on other sites More sharing options...
blackbard Posted November 1, 2009 Author Report Share Posted November 1, 2009 Here is mine. Let me know if the pic is ok... Quote Link to comment Share on other sites More sharing options...
Bike Mike Posted November 1, 2009 Report Share Posted November 1, 2009 About the best I could do getting to match the angle of your photo. I aligned the center of the hands then dialed in the chronos as best I could. As you can see, your DW is much closed to center then the 7753. I would be interested in the Gen. Dial you have available if you can not use it. PM me. Thanks. Quote Link to comment Share on other sites More sharing options...
blackbard Posted November 1, 2009 Author Report Share Posted November 1, 2009 Thanks! I suppose I need to add a 7753 date wheel to the quest.... Quote Link to comment Share on other sites More sharing options...
Bike Mike Posted November 1, 2009 Report Share Posted November 1, 2009 Thanks! I suppose I need to add a 7753 date wheel to the quest.... Yep. As it is bigger in diameter. Quote Link to comment Share on other sites More sharing options...
Jimster Posted November 5, 2009 Report Share Posted November 5, 2009 Get on Leo's list for a 7753 the next time he runs them. Jim Quote Link to comment Share on other sites More sharing options...
blackbard Posted November 6, 2009 Author Report Share Posted November 6, 2009 Ive sent him emails as well as Tanya... Hopefully he will put me on the list. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.