Breitling Movement want run....

[mamba]

hi

first sry for my bad english, i am austrian ^^

the pusher from my blackbird goes off so i will fix it, i remove the crown,the movement and fix the pusher.

after that i replace the movement back and put in the crown, and then nothing, want run, all work, change date and time, but run no change.

any idea what is happening?

thanks

greetings

andi

Edited November 5, 2009 by mamba

[FxrAndy]

It sounds like the keyless works is set in the hand set postion but wont allow the stem to go to the winding position where the movement will be unhacked and then allowed to run, where was the crown position when you removed the stem?

[mamba]

when i put it out it was on timeset position...

thanks

[FxrAndy]

I think but not 100% it should be in the winding pos, hopefully ziggy will read this and confirm it

[mamba]

winging is work position?

thanks

[FxrAndy]

Yes in the winding position the watch will run, when you pull the crown to set the time the watch will stop (this is called hacking or hacking the movement)

[Rolexman]

Yep, best position to release the stem is the winding position. It's very hard to popp the keyless works on a a7750 so maybe the setlever didn't engage properly. Remove the crown by pushing the stem release button and try again.