milsub5517 Posted November 25, 2009 Report Share Posted November 25, 2009 Hi gang! I've got some parts for what i think will be a 201A project: FGD dial, older Helenarou? case (see pics below), 201A caseback. Is this case a good place to start? TIA. Quote Link to comment Share on other sites More sharing options...
NoobyPanFan Posted November 25, 2009 Report Share Posted November 25, 2009 I would have to say YES! Get a T-48 and an LH CG... Have the dial lumed by The Zigmeister and a nice Swiss from Otto and your all good. I just did the same and it never leaves my wrist! Quote Link to comment Share on other sites More sharing options...
milsub5517 Posted November 25, 2009 Author Report Share Posted November 25, 2009 does LH's CG fit these cases? Quote Link to comment Share on other sites More sharing options...
arminvanbuuren Posted November 25, 2009 Report Share Posted November 25, 2009 the lugs looks really good.. the only problem i think is the bezel height? im not sure really Quote Link to comment Share on other sites More sharing options...
bwhitesox Posted November 25, 2009 Report Share Posted November 25, 2009 Thats a great place to start with a good looking caseback as well. Quote Link to comment Share on other sites More sharing options...
StormTooper4 Posted November 25, 2009 Report Share Posted November 25, 2009 That case back looks very good for sure , dimple still there though. Lugs nice a short but will need to be drilled on the none CG side. For some nice pre V screws and that's quite hard to do. I'm sure most CGs will fit LH, V or DSN. A brushed DSN might be a cheaper option or a Nembo. Nice little project you've got yourself there. Question is , if that's a HenRo case does the Caseback fit ?, the one she/he sent me didn't fit standard casebacks ST4 Quote Link to comment Share on other sites More sharing options...
Brodie Posted November 25, 2009 Report Share Posted November 25, 2009 mil, that case looks similar to one I had and if it is the same, I hate to break it you to but I don't think it's a good case. It's not the "old school" helenarou version that was accurate for a Pre-V. This case is more of a mashup and not particularly accurate to any generation. Here's the post I made about the case I had. http://www.rwgforum.com/topic/101399-case-id/ The lugs and flat bezel looked okay, but some of the faults I found were: - Odd overall case size (slightly larger than a standard case, crystal looked larger as well) - Caseback was too large (would not accept any caseback I had, hole was too large) - CG screw holes too small (would not accept standard size CG screws, only the tiny ones that came with the case) Check your case to see if it has the same issues. I hope not and hope you have a good case and mine just sucked. Quote Link to comment Share on other sites More sharing options...
milsub5517 Posted November 25, 2009 Author Report Share Posted November 25, 2009 confirmed. my 201A case back does not really fit. looks like it is a correct diameter from what i can tell but the thread size is different. it catches threads just a little but does not screw in all the way. so avitt, me and you - we all have the same case. lol. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.