hiker01 Posted December 31, 2009 Report Posted December 31, 2009 Heeeeeeelp! Is there such a thing as a stocked Stem Release Pin on an Asian 7750? I can't seem to release the stem on this 6263 and I'm pressing hard enough that I'm afraid I'll screw up the keyless.... Any help/tip will be highly appreciated! Thanks! Hike
freddy333 Posted December 31, 2009 Report Posted December 31, 2009 1st, I would try something with a point instead of a flat blade, which may be coming into contact with the adjoining plate (keeping the release from being depressed sufficiently). Some of these can be fairly stiff, but, again, I would try a small nail or safety pin 1st.
ubiquitous Posted December 31, 2009 Report Posted December 31, 2009 I agree with f333; the release may be a bit stiff, but it should let loose.
hiker01 Posted December 31, 2009 Author Report Posted December 31, 2009 Thanks Guys! I will try that! Much oblige! F-
gplracer Posted December 31, 2009 Report Posted December 31, 2009 Also be sure the stem is in the winding position or so I am told. I do not speak from experience only mental forum notes.
southcoast68 Posted December 31, 2009 Report Posted December 31, 2009 Also, when you replace the stem, you will have to give the same release button a push to get the stem to lock in.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now