shultz Posted January 10, 2010 Report Share Posted January 10, 2010 I am planning to mod two Omega reps with genuine parts: 300M Diver and a Bond both with ETA 2824/ 2836. I found the dials I need at Ofrei's. Is the swap easy or must the feed position be changed? What's about the date window? Will it match the ETA? Thanks for your help. Link to comment Share on other sites More sharing options...
ubiquitous Posted January 10, 2010 Report Share Posted January 10, 2010 If you're swapping a dial meant for an Omega 1120/2500, etc (ETA 2892), then the dial feet are in the same position as the 2824/2836. However, one thing you should be aware of is that the gen dials have shorter feet, as the 2892 is a much thinner movement than the 2824/2836. Hence, the dial feet may or may not catch on the dial feet clips. Otherwise, it's a straight swap. Date window, etc are all in the same location. Old- Rep dial/datewheel on an ETA 2824: New- Gen dial and 2892 datewheel on the same movement: Hope this helps... Link to comment Share on other sites More sharing options...
shultz Posted January 10, 2010 Author Report Share Posted January 10, 2010 Hey ubi, much appreciated! So I am going to order the dials and start the work Link to comment Share on other sites More sharing options...
ubiquitous Posted January 10, 2010 Report Share Posted January 10, 2010 Good stuff! Looking forward to seeing these projects come to life! Link to comment Share on other sites More sharing options...
zbig Posted January 11, 2010 Report Share Posted January 11, 2010 But what about a dial in UPO 45 mm, Can I fit a gen dial too? And gen hands it's no problem to fit? Link to comment Share on other sites More sharing options...
danza1812 Posted January 11, 2010 Report Share Posted January 11, 2010 But what about a dial in UPO 45 mm, Can I fit a gen dial too? And gen hands it's no problem to fit? Yes gen dial and hands on the UPO fits perfectly too. Link to comment Share on other sites More sharing options...
ubiquitous Posted January 11, 2010 Report Share Posted January 11, 2010 Correct indeed. ETA 2824/2836/2846/2892 all have the same pinion sizes- 90/150/25. Since the 2500 is based on the 2892, gen hands fit any of these movements, no problem: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now