flyback Posted September 10, 2006 Report Share Posted September 10, 2006 (edited) My mbw 1680 bezel turns almost freely from 12 to 2 o'clock then is very hard (almost impossible) to turn.. Do you know what can i do to resolve this problem. I have seen this useful link about sub bezel removing but need advice! Thanks! http://www.vikbobil.se/bezel.html Edited September 10, 2006 by flyback Quote Link to comment Share on other sites More sharing options...
ubiquitous Posted September 10, 2006 Report Share Posted September 10, 2006 Sounds like you'll need to tweak the washer spring. Pull the bezel and check it's shape. Adjustments can be made to correct it's feel... Quote Link to comment Share on other sites More sharing options...
flyback Posted September 10, 2006 Author Report Share Posted September 10, 2006 Thanks Ubi! You're the man! (The vintage sub man!) Quote Link to comment Share on other sites More sharing options...
ubiquitous Posted September 10, 2006 Report Share Posted September 10, 2006 T'is nothing, sir. The bezel is very easy to pop off. I use a debit card to wedge between the case and the bezel; the plastic of the card is soft and won't scratch the case. Once removed, you'll see the washer spring. It may be bent funny, or there might not be one present at all. Quote Link to comment Share on other sites More sharing options...
marsupilami Posted September 11, 2006 Report Share Posted September 11, 2006 ...and where do I get a washer spring now ? Quote Link to comment Share on other sites More sharing options...
ubiquitous Posted September 11, 2006 Report Share Posted September 11, 2006 Some of the supply houses may have them still... I don't quite recall the last place I saw them for sale, but I do remember them costing a dollar or two... Quote Link to comment Share on other sites More sharing options...
Heywood Posted September 11, 2006 Report Share Posted September 11, 2006 Washer spring for 1680 is available from Smith Supply http://www.watchpartonline.com//p72.html. I think Jules Borel has them too. Quote Link to comment Share on other sites More sharing options...
flyback Posted September 11, 2006 Author Report Share Posted September 11, 2006 T'is nothing, sir. The bezel is very easy to pop off. I use a debit card to wedge between the case and the bezel; the plastic of the card is soft and won't scratch the case. Once removed, you'll see the washer spring. It may be bent funny, or there might not be one present at all. I used a debit card. the bezel was easy to pop off. And.. there is no washer spring! i put the bezel back and it now turns without being too easy or to hard to turn. May be the bezel was not properly installed. One more little thing to buy! Quote Link to comment Share on other sites More sharing options...
david-aussie Posted September 11, 2006 Report Share Posted September 11, 2006 I had the same problem. but I ended up just using a thin piece of foam. and now its perfect... still bidirectional bezel...with right amount of friction.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.