cougaree Posted June 13, 2010 Report Share Posted June 13, 2010 When I grow up, I've been given advices from elderly about women. They say when evaluating a gal to be your mate, you have to look at her shortcomings more and don't get blinded by her strength. I think this advice applies to watches we are going to buy... very well, especially our imperfect reps. As you all know, I've been crazy about Breitlings lately and having a few nice ones in my collection. Now, I would like to seriously looking into the HBB maker's version of SOHC. Any thoughts on it? I don't see a whole lot of discussion on this watch on our board. From what I see on the dealer website, it certainly has the correct model stamped on the caseback. Anything on the rep bothers you somewhat? Thanks! Link to comment Share on other sites More sharing options...
cougaree Posted June 13, 2010 Author Report Share Posted June 13, 2010 Link to comment Share on other sites More sharing options...
cougaree Posted June 13, 2010 Author Report Share Posted June 13, 2010 No issues??? Link to comment Share on other sites More sharing options...
Member X Posted June 14, 2010 Report Share Posted June 14, 2010 I think your title is confusing people because it soounds like there's a Hublot Big Bang version of a Breitling! lol But you are instead talking about the SOHC from the factory that makes the HBB? I think that's the v2? I can't remember for sure, you will have to wait for someone else to confirm. I do know that the v2 is virtually perfect (bar sometimes slightly off lume dots) and that it appears to be out of production at the moment in brown and black. Get the rep Ocean Racer rubber strap as it's spot on, the only issue is the clasp not closing as tightly as it should. The mesh is too big and the leather is... alright... Also, order off Mary and get a swiss movement as the Asian ETA clone suffers difficulty setting the time and date (covered in a thread in the Breitling forum already), but it's not bad if you can't stretch to ther extra money. I have both and would go swiss in the future! Link to comment Share on other sites More sharing options...
cougaree Posted June 14, 2010 Author Report Share Posted June 14, 2010 Member X, thanks for the reply and clarification! Basically, I was talking about the first watch under Breitling superocean on Josh's website. You are probably right. It's the v2. I originally thought v2 was from the same factory as v1 and then there is the HBB version of SOHC. If it's virtually perfect, does it mean the lugs are perfect also? I mean I've heard on the SOH v2, people say the lugs are longer and bent down more... something you can't really mod to fix. Link to comment Share on other sites More sharing options...
cougaree Posted June 14, 2010 Author Report Share Posted June 14, 2010 I just found an old post, this was what Yodap said. "There are 3 versions. V1: lume dots at 15, 30, 45, 60 - bad datefont - low beat movement = crap, stay away V2: much better, refined dial, but can be still spotted at the blobby , uncentered lume, and the A173XX caseback V3: Dial AR application is near perfect, caseback corrected, awesome AR and OR strap = THE WAY TO GO! " I wonder if v3 = HBB maker's SOHC Link to comment Share on other sites More sharing options...
Member X Posted June 14, 2010 Report Share Posted June 14, 2010 I thought the v2 lugs were pretty spot on but I can't remember where I read it now. I also read that post from Yodap but AFAIK there are only two? (I've not read of a v3 anywhere else but that post!) I would agree that the v2 I have has slightly off lume dots but it does also have stunning AR and the pretty much perfect OR strap. I'm confused by the A173XX caseback reference by Yodap, I thought that was correct? I think it could be worth asking him to clarify where he heard there are 3 versions and what's wrong with the caseback reference... Link to comment Share on other sites More sharing options...
alanytical Posted June 14, 2010 Report Share Posted June 14, 2010 I'm wearing one right now. The only fault is the raised "B" logo placement on the dial is lower and further right than the gen. Also, the rep OR strap is only close in appearance; not feel. I put a gen OR strap on mine. Link to comment Share on other sites More sharing options...
cougaree Posted June 14, 2010 Author Report Share Posted June 14, 2010 This is the one with caseback making of "A13320", correct? I know some SOHC has the wrong caseback number. Link to comment Share on other sites More sharing options...
alanytical Posted June 14, 2010 Report Share Posted June 14, 2010 Yes A13320 Link to comment Share on other sites More sharing options...
cougaree Posted June 14, 2010 Author Report Share Posted June 14, 2010 Sweet. I like it. Thanks for sharing! Link to comment Share on other sites More sharing options...
Member X Posted June 14, 2010 Report Share Posted June 14, 2010 This is the one with caseback making of "A13320", correct? I know some SOHC has the wrong caseback number. Just to confirm... which is correct? I think mine is A17320... Link to comment Share on other sites More sharing options...
Member X Posted June 14, 2010 Report Share Posted June 14, 2010 I put a gen OR strap on mine. Hey alanytical, I've tried to PM you about this but it says you can't receive PMs! Please send me a message if you get this or post to say you've cleared your inbox! Cheers! Link to comment Share on other sites More sharing options...
alanytical Posted June 15, 2010 Report Share Posted June 15, 2010 Just to confirm... which is correct? I think mine is A17320... PMs cleared, thanks. A17320 = non-chrono A13320 = chrono Link to comment Share on other sites More sharing options...
Member X Posted June 15, 2010 Report Share Posted June 15, 2010 Cool, thanks for clearing that up! Link to comment Share on other sites More sharing options...
Speedman Posted June 17, 2010 Report Share Posted June 17, 2010 Never heard anybody say that the raised "B" and logo is wrong. How much are they wrong? Link to comment Share on other sites More sharing options...
alanytical Posted June 17, 2010 Report Share Posted June 17, 2010 (edited) The placement of the applied "B" logo on the dial is wrong, not the logo itself. Edited June 17, 2010 by alanytical Link to comment Share on other sites More sharing options...
veja74 Posted June 18, 2010 Report Share Posted June 18, 2010 I have the bronze version and it is near perfect enough that I have no desire to buy the gen. I will have to check that B placement... back to the AD with me, as if I have not spent enough time there burning images of the gens into my memory... The only thing that I have seen it that the date fills the window more on the rep than it does on the gen. As for the lugs, perfect as far as I can tell. I read somewhere that the rep lugs were too sharp and needed to be sanded down but the gen lugs are just as sharp. Link to comment Share on other sites More sharing options...
cougaree Posted June 18, 2010 Author Report Share Posted June 18, 2010 Man, I really want one. Considering I just bought a gen mesh bracelet already. But I don't want to pay any dealer and then told they don't have any neither. Link to comment Share on other sites More sharing options...
Member X Posted June 18, 2010 Report Share Posted June 18, 2010 Then ask Mary - she will tell you if she can get it before you order it or hand any money over I know the SOH non-chrono is apparently only available in Blue at the moment, but I'm not sure on the chrono version. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now