Ahky Posted June 16, 2010 Report Share Posted June 16, 2010 Dear Members. Can you offer some advice on how to properly remove the bezel off of a DW 6263 case? Much appreciate it. Quote Link to comment Share on other sites More sharing options...
chiman12 Posted June 16, 2010 Report Share Posted June 16, 2010 Get a pocket knife or a case back opener...pry up on the bezel a little bit at a time...all around until it comes off. I found that the DW bezels actually fit loose and it should come off with ease. Quote Link to comment Share on other sites More sharing options...
freddy333 Posted June 16, 2010 Report Share Posted June 16, 2010 Wedge a thin knife or stout razor blade between the bottom of the bezel & top face of the case. Once in, remove & repeat @ 180 degrees from the starting point. Repeat @ 90 degrees & again @ the other 90 degree point. Depending on the fit of the bezel around the crystal (how tight the coupling is), it may take anywhere from a few minutes to an hour or so to get the razor in. But once you are in, work the blade around the entire perimeter of the bezel until it loosens enough to be removed. Quote Link to comment Share on other sites More sharing options...
Ahky Posted June 16, 2010 Author Report Share Posted June 16, 2010 As always thank you for the great advice and guidance. all the best. Quote Link to comment Share on other sites More sharing options...
gplracer Posted June 17, 2010 Report Share Posted June 17, 2010 Take your time it can be hard to get off the first time. Follow the above advice and you will be fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.