Migge Posted August 28, 2010 Report Share Posted August 28, 2010 Hi everyone, I am intersted in knowing how a catch-style spring bar works, and if a special leather strap is required or not? Or any modification to the existing leather strap is required? Who better to ask then the paneristas who are the most frequent strap changers... Take a look at the link too see what springbars I am talking about. Click me Any feedback is appreciated. Please share your experience. Cheers Mike Link to comment Share on other sites More sharing options...
FxrAndy Posted August 28, 2010 Report Share Posted August 28, 2010 These are similar to the patek style spring bars and need a special strap, or you can mod the strap you want to use Link to comment Share on other sites More sharing options...
Migge Posted August 28, 2010 Author Report Share Posted August 28, 2010 These are similar to the patek style spring bars and need a special strap, or you can mod the strap you want to use Have no experience wuth patek style spring bars unfortunately. Mod the strap would be an option for sure, but how do they work. Is the "catch" removable, so you i.e can put in the springbar in the strap and re-install the "catch" in an for example drilled hole in the strap? thanks andy Link to comment Share on other sites More sharing options...
blackbard Posted August 28, 2010 Report Share Posted August 28, 2010 Far as I know, the strap has to be made for these. This is a quick release spring bar found on many watches. Usually, this spring bar is a permanent fixture of the strap. Link to comment Share on other sites More sharing options...
Migge Posted August 28, 2010 Author Report Share Posted August 28, 2010 Far as I know, the strap has to be made for these. This is a quick release spring bar found on many watches. Usually, this spring bar is a permanent fixture of the strap. Blackbard, I had theese style springbars on a couple of hirsch straps (Mounted from the beginning offcourse) Allthough, I think there must be a way of mounting theese on ordinary straps as well, if I only new how the "catch" is attached that would be a massive help. Making a cut-out for the springbar (In the leater strap) should help if the catch is mounted so it can be detached and re-attached. Mike Link to comment Share on other sites More sharing options...
blackbard Posted August 28, 2010 Report Share Posted August 28, 2010 I just sold a watch with these. I'll check to see if I have any straps like this lying around. Easiest way to attach would be to cut a "groove" carefully in one end of the strap where it attaches to the watch. You could then insert the quick release springbar. Only issue would be the integrity of the strap once this is done unless you can cut the groove without going all the way to the end and still fit the spring bar in... Good luck! Link to comment Share on other sites More sharing options...
Migge Posted August 29, 2010 Author Report Share Posted August 29, 2010 Thanks for your input Blackbard, it seems it will be quite some work for little results, but maybe I will try it despite that Link to comment Share on other sites More sharing options...
blackbard Posted August 29, 2010 Report Share Posted August 29, 2010 no harm in trying... Link to comment Share on other sites More sharing options...
panerai153 Posted August 30, 2010 Report Share Posted August 30, 2010 I'm not sure how deep these springbars extend into the lug holes in the case, but I would be aware that over time they could very well "bugger" up the threads on your PAM case. If this happens, your up the proverbial creek, should you decide to go back to the conventional PAM screw in bars. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now